STD7N52K3
- Mfr.Part #
- STD7N52K3
- Manufacturer
- STMicroelectronics
- Package / Case
- TO-252-3, DPak (2 Leads + Tab), SC-63
- Datasheet
- Download
- Description
- MOSFET N-CH 525V 6A DPAK
- Stock
- 6,278
- In Stock :
- 6,278
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- STMicroelectronics
- Product Category :
- Transistors - FETs, MOSFETs - Single
- REACH SVHC :
- No SVHC
- Width :
- 6.2mm
- Lead Free :
- Lead Free
- Pin Count :
- 3
- ECCN Code :
- EAR99
- Transistor Application :
- SWITCHING
- Number of Elements :
- 1
- Number of Pins :
- 3
- Number of Terminations :
- 2
- Rds On (Max) @ Id, Vgs :
- 980m Ω @ 3.1A, 10V
- Length :
- 6.6mm
- Mounting Type :
- Surface Mount
- Terminal Position :
- Single
- Turn On Delay Time :
- 13 ns
- Power Dissipation :
- 90W
- Vgs(th) (Max) @ Id :
- 4.5V @ 50μA
- Threshold Voltage :
- 3.75V
- Base Part Number :
- STD7
- Packaging :
- Digi-Reel®
- Rise Time :
- 11ns
- Terminal Form :
- Gull wing
- Current - Continuous Drain (Id) @ 25°C :
- 6A Tc
- Drive Voltage (Max Rds On,Min Rds On) :
- 10V
- Operating Mode :
- ENHANCEMENT MODE
- Lifecycle Status :
- ACTIVE (Last Updated: 7 months ago)
- Continuous Drain Current (ID) :
- 6A
- Drain to Source Breakdown Voltage :
- 525V
- Gate Charge (Qg) (Max) @ Vgs :
- 34nC @ 10V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Fall Time (Typ) :
- 19 ns
- Series :
- SuperMESH3™
- Vgs (Max) :
- ±30V
- Radiation Hardening :
- No
- JESD-609 Code :
- e3
- Peak Reflow Temperature (Cel) :
- 260
- Drain Current-Max (Abs) (ID) :
- 6.2A
- JEDEC-95 Code :
- TO-252AA
- Resistance :
- 850mOhm
- JESD-30 Code :
- R-PSSO-G2
- Package / Case :
- TO-252-3, DPak (2 Leads + Tab), SC-63
- Operating Temperature :
- 150°C TJ
- Power Dissipation-Max :
- 90W Tc
- Gate to Source Voltage (Vgs) :
- 30V
- Configuration :
- SINGLE WITH BUILT-IN DIODE
- FET Type :
- N-Channel
- Input Capacitance (Ciss) (Max) @ Vds :
- 737pF @ 100V
- Turn-Off Delay Time :
- 36 ns
- Pulsed Drain Current-Max (IDM) :
- 25A
- Transistor Element Material :
- SILICON
- Height :
- 2.4mm
- RoHS Status :
- ROHS3 Compliant
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Mount :
- Surface Mount
- Datasheets
- STD7N52K3
%3b%3b2.jpg)
N-Channel Digi-Reel® 980m Ω @ 3.1A, 10V ±30V 737pF @ 100V 34nC @ 10V TO-252-3, DPak (2 Leads + Tab), SC-63
STD7N52K3 Overview
CI refers to the capacitance between two input terminals on an op amp with either input grounded, and this device's maximum input capacitance is 737pF @ 100V.In this device, the drain current (ID) is equal to the continuous current transistor can conduct.This device has 525V drain-to-source breakdown voltage, where VDS corresponds to the ID at which a specified value of ID flows and VGS equals 525V.There is no drain current on this device since the maximum continuous current it can conduct is 6.2A.As a result of its turn-off delay time, which is 36 ns, the device has taken time to charge its input capacitance before drain current conduction begins.There is a peak drain current of 25A, its maximum pulsed drain current.Input capacitance charge delays drain current conduction until the time it takes to charge input capacitance reaches 13 ns.Gate-source voltages (VGS) are voltages that fall across the gate-source terminal of FET transistors. VGS is sometimes 30VV.The threshold voltage is the point at which an electrical device activates any one of its operations, which for this transistor is 3.75V.In addition to reducing power consumption, this device uses drive voltage (10V).
STD7N52K3 Features
a continuous drain current (ID) of 6A
a drain-to-source breakdown voltage of 525V voltage
the turn-off delay time is 36 ns
based on its rated peak drain current 25A.
a threshold voltage of 3.75V
STD7N52K3 Applications
There are a lot of STMicroelectronics
STD7N52K3 applications of single MOSFETs transistors.
- DC/DC converters
- Power Tools
- Motor Drives and Uninterruptible Power Supples
- Synchronous Rectification
- Battery Protection Circuit
- Telecom 1 Sever Power Supplies
- Industrial Power Supplies
- PFC stages, hard switching PWM stages and resonant switching
- PWM stages for e.g. PC Silverbox, Adapter, LCD & PDP TV,
- Lighting, Server, Telecom and UPS.
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















