IRF3706SPBF
Or copy the link below:
- Mfr.Part #
- IRF3706SPBF
- Manufacturer
- Infineon Technologies
- Package / Case
- TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
- Datasheet
- Download
- Description
- MOSFET N-CH 20V 77A D2PAK
- Stock
- 8,657
- In Stock ：
- 8,657
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Infineon Technologies
- Product Category :
- Transistors - FETs, MOSFETs - Single
- FET Type :
- N-Channel
- Drain to Source Breakdown Voltage :
- 20V
- Current - Continuous Drain (Id) @ 25°C :
- 77A Tc
- Nominal Vgs :
- 2 V
- Rds On Max :
- 8.5 mΩ
- REACH SVHC :
- No SVHC
- Max Operating Temperature :
- 175°C
- Input Capacitance (Ciss) (Max) @ Vds :
- 2410pF @ 10V
- Radiation Hardening :
- No
- Power Dissipation-Max :
- 88W Tc
- Turn-Off Delay Time :
- 17 ns
- Series :
- HEXFET®
- Turn On Delay Time :
- 6.8 ns
- Published :
- 2004
- Drive Voltage (Max Rds On,Min Rds On) :
- 2.8V 10V
- Vgs (Max) :
- ±12V
- Number of Pins :
- 3
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Rise Time :
- 87ns
- Mounting Type :
- Surface Mount
- Drain to Source Voltage (Vdss) :
- 20V
- Gate to Source Voltage (Vgs) :
- 12V
- Power Dissipation :
- 88W
- Min Operating Temperature :
- -55°C
- Resistance :
- 8.5mOhm
- Supplier Device Package :
- D2PAK
- Lead Free :
- Lead Free
- Vgs(th) (Max) @ Id :
- 2V @ 250μA
- Element Configuration :
- Single
- Drain to Source Resistance :
- 10.5mOhm
- Dual Supply Voltage :
- 20V
- Voltage - Rated DC :
- 20V
- Gate Charge (Qg) (Max) @ Vgs :
- 35nC @ 4.5V
- Mount :
- Surface Mount
- Continuous Drain Current (ID) :
- 77A
- Input Capacitance :
- 2.41nF
- Current Rating :
- 77A
- Termination :
- SMD/SMT
- RoHS Status :
- RoHS Compliant
- Rds On (Max) @ Id, Vgs :
- 8.5mOhm @ 15A, 10V
- Package / Case :
- TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
- Number of Elements :
- 1
- Packaging :
- Tube
- Fall Time (Typ) :
- 4.8 ns
- Operating Temperature :
- -55°C~175°C TJ
- Datasheets
- IRF3706SPBF
N-Channel Tube 8.5mOhm @ 15A, 10V ±12V 2410pF @ 10V 35nC @ 4.5V 20V TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
IRF3706SPBF Overview
An op amp's input capacitance is defined as the capacitance between both of its input terminals with either input grounded, and 2410pF @ 10V is its maximum input capacitance.The drain current is the maximum continuous current the device can conduct, and this device has 77A continuous drain current (ID).A drainage-to-source breakdown voltage corresponds to the voltage at which a specified value of ID flows, where VGS is 20V, and this device has a drainage-to-source breakdown voltage of 20VV.Input capacitance must be charged before drain current conduction can begin, so the turn-off delay time is 17 ns.This device has a drain-to-source resistance of 10.5mOhm when a gate-to-source voltage (VGS) is applied to bias it into the on state, and when this voltage is applied to bias it into the on state.Before drain current conduction begins, the device's input capacitance must be charged, so the delay time is 6.8 ns.An FET transistor's gate-source voltage, VGS, indicates how much voltage is applied across the transistor's gate-source terminal and it can range from 12V to 1.For this transistor to work, a voltage 20V is required between drain and source (Vdss).Using drive voltage (2.8V 10V), this device contributes to a reduction in overall power consumption.
IRF3706SPBF Features
a continuous drain current (ID) of 77A
a drain-to-source breakdown voltage of 20V voltage
the turn-off delay time is 17 ns
single MOSFETs transistor is 10.5mOhm
a 20V drain to source voltage (Vdss)
IRF3706SPBF Applications
There are a lot of Infineon Technologies
IRF3706SPBF applications of single MOSFETs transistors.
- AC-DC Power Supply
- Synchronous Rectification for ATX 1 Server I Telecom PSU
- Motor drives and Uninterruptible Power Supplies
- Micro Solar Inverter
- DC/DC converters
- Power Tools
- Motor Drives and Uninterruptible Power Supples
- Synchronous Rectification
- Battery Protection Circuit
- Telecom 1 Sever Power Supplies
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
