STP6N62K3
Or copy the link below:
- Mfr.Part #
- STP6N62K3
- Manufacturer
- STMicroelectronics
- Package / Case
- TO-220-3
- Datasheet
- Download
- Description
- MOSFET N-CH 620V 5.5A TO220AB
- Stock
- 2,998
- In Stock ：
- 2,998
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- STMicroelectronics
- Product Category :
- Transistors - FETs, MOSFETs - Single
- Operating Mode :
- ENHANCEMENT MODE
- Number of Elements :
- 1
- Power Dissipation :
- 90W
- Turn On Delay Time :
- 22 ns
- Package / Case :
- TO-220-3
- FET Type :
- N-Channel
- Packaging :
- Tube
- Fall Time (Typ) :
- 19 ns
- Transistor Application :
- SWITCHING
- Width :
- 4.6mm
- Element Configuration :
- Single
- RoHS Status :
- ROHS3 Compliant
- Base Part Number :
- STP6N
- Vgs (Max) :
- ±30V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- JEDEC-95 Code :
- TO-220AB
- Additional Feature :
- ULTRA LOW-ON RESISTANCE
- Pulsed Drain Current-Max (IDM) :
- 22A
- Pin Count :
- 3
- Vgs(th) (Max) @ Id :
- 4.5V @ 50μA
- Height :
- 15.75mm
- Lifecycle Status :
- ACTIVE (Last Updated: 7 months ago)
- Current - Continuous Drain (Id) @ 25°C :
- 5.5A Tc
- Rds On (Max) @ Id, Vgs :
- 1.2 Ω @ 2.8A, 10V
- Drain to Source Breakdown Voltage :
- 620V
- Series :
- SuperMESH3™
- Lead Free :
- Lead Free
- Number of Pins :
- 3
- Power Dissipation-Max :
- 90W Tc
- Mounting Type :
- Through Hole
- Resistance :
- 1.2Ohm
- Turn-Off Delay Time :
- 49 ns
- Number of Terminations :
- 3
- Gate to Source Voltage (Vgs) :
- 30V
- Gate Charge (Qg) (Max) @ Vgs :
- 34nC @ 10V
- Terminal Finish :
- Matte Tin (Sn)
- Drive Voltage (Max Rds On,Min Rds On) :
- 10V
- Radiation Hardening :
- No
- Rise Time :
- 12.5ns
- Mount :
- Through Hole
- Length :
- 10.4mm
- Operating Temperature :
- 150°C TJ
- Input Capacitance (Ciss) (Max) @ Vds :
- 875pF @ 50V
- ECCN Code :
- EAR99
- Threshold Voltage :
- 3.75V
- Factory Lead Time :
- 12 Weeks
- JESD-609 Code :
- e3
- Transistor Element Material :
- SILICON
- Continuous Drain Current (ID) :
- 5.5A
- REACH SVHC :
- No SVHC
- Datasheets
- STP6N62K3
N-Channel Tube 1.2 Ω @ 2.8A, 10V ±30V 875pF @ 50V 34nC @ 10V TO-220-3
STP6N62K3 Overview
As an op amp's input capacitance parameter, CI, is defined as the capacitance between the input terminals when one input is grounded, this device's maximum input capacitance is 875pF @ 50V.This device conducts a continuous drain current (ID) of 5.5A, which is the maximum continuous current transistor can conduct.Using VGS=620V and a specified value of ID, the drain-source breakdown voltage is VDS at which a specified value of ID flows. This device has a drain-source breakdown voltage of 620V (that is, no charge flow from drain to source).When the device is turned off, a turn-off delay time of 49 ns occurs as the input capacitance charges before drain current conduction commences.Pulsed drain current is maximum rated peak drain current 22A.Before drain current conduction can begin, the device's turning-on delay time takes time to charge its input capacitance. This delay time is 22 ns.Voltage at the gate-source terminal of a FET transistor, called the gate-source voltage, or VGS, can be 30V.Activation of any electrical operation happens at threshold voltage, and this transistor has 3.75V threshold voltage.In order to reduce power consumption, this device uses a drive voltage of 10V volts (10V).
STP6N62K3 Features
a continuous drain current (ID) of 5.5A
a drain-to-source breakdown voltage of 620V voltage
the turn-off delay time is 49 ns
based on its rated peak drain current 22A.
a threshold voltage of 3.75V
STP6N62K3 Applications
There are a lot of STMicroelectronics
STP6N62K3 applications of single MOSFETs transistors.
- Motor drives and Uninterruptible Power Supplies
- Micro Solar Inverter
- DC/DC converters
- Power Tools
- Motor Drives and Uninterruptible Power Supples
- Synchronous Rectification
- Battery Protection Circuit
- Telecom 1 Sever Power Supplies
- Industrial Power Supplies
- PFC stages, hard switching PWM stages and resonant switching
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
