IRF6629TR1PBF
Or copy the link below:
- Mfr.Part #
- IRF6629TR1PBF
- Manufacturer
- Infineon Technologies
- Package / Case
- DirectFET™ Isometric MX
- Datasheet
- Download
- Description
- MOSFET N-CH 25V 29A DIRECTFET
- Stock
- 4,675
- In Stock ：
- 4,675
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Infineon Technologies
- Product Category :
- Transistors - FETs, MOSFETs - Single
- Package / Case :
- DirectFET™ Isometric MX
- Resistance :
- 2.1MOhm
- Drain to Source Resistance :
- 2.7MOhm
- FET Type :
- N-Channel
- Lead Free :
- Lead Free
- Gate to Source Voltage (Vgs) :
- 20V
- Turn-Off Delay Time :
- 20 ns
- Fall Time (Typ) :
- 7.4 ns
- Continuous Drain Current (ID) :
- 23A
- REACH SVHC :
- No SVHC
- Drain to Source Voltage (Vdss) :
- 25V
- Published :
- 2006
- Min Operating Temperature :
- -40°C
- Dual Supply Voltage :
- 25V
- Operating Temperature :
- -40°C~150°C TJ
- Power Dissipation-Max :
- 2.8W Ta 100W Tc
- Vgs(th) (Max) @ Id :
- 2.35V @ 100μA
- Input Capacitance (Ciss) (Max) @ Vds :
- 4260pF @ 13V
- Drain to Source Breakdown Voltage :
- 25V
- Rise Time :
- 67ns
- Current Rating :
- 29A
- Packaging :
- Tape and Reel (TR)
- RoHS Status :
- RoHS Compliant
- Max Operating Temperature :
- 150°C
- Power Dissipation :
- 100W
- Threshold Voltage :
- 1.8V
- Rds On Max :
- 2.1 mΩ
- Current - Continuous Drain (Id) @ 25°C :
- 29A Ta 180A Tc
- Series :
- HEXFET®
- Gate Charge (Qg) (Max) @ Vgs :
- 51nC @ 4.5V
- Height :
- 506μm
- Number of Pins :
- 5
- Mounting Type :
- Surface Mount
- Width :
- 5.05mm
- Mount :
- Surface Mount
- Drive Voltage (Max Rds On,Min Rds On) :
- 4.5V 10V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Radiation Hardening :
- No
- Vgs (Max) :
- ±20V
- Rds On (Max) @ Id, Vgs :
- 2.1mOhm @ 29A, 10V
- Input Capacitance :
- 4.26nF
- Turn On Delay Time :
- 20 ns
- Nominal Vgs :
- 1.8 V
- Termination :
- SMD/SMT
- Supplier Device Package :
- DIRECTFET™ MX
- Voltage - Rated DC :
- 25V
- Datasheets
- IRF6629TR1PBF
N-Channel Tape & Reel (TR) 2.1mOhm @ 29A, 10V ±20V 4260pF @ 13V 51nC @ 4.5V 25V DirectFET™ Isometric MX
IRF6629TR1PBF Overview
An op amp's input capacitance is defined as the capacitance between both of its input terminals with either input grounded, and 4260pF @ 13V is its maximum input capacitance.The drain current is the maximum continuous current the device can conduct, and this device has 23A continuous drain current (ID).A drainage-to-source breakdown voltage corresponds to the voltage at which a specified value of ID flows, where VGS is 25V, and this device has a drainage-to-source breakdown voltage of 25VV.Input capacitance must be charged before drain current conduction can begin, so the turn-off delay time is 20 ns.This device has a drain-to-source resistance of 2.7mOhm when a gate-to-source voltage (VGS) is applied to bias it into the on state, and when this voltage is applied to bias it into the on state.Before drain current conduction begins, the device's input capacitance must be charged, so the delay time is 20 ns.An FET transistor's gate-source voltage, VGS, indicates how much voltage is applied across the transistor's gate-source terminal and it can range from 20V to 1.In this case, the threshold voltage of the transistor is 1.8V, which means that it will not activate any of its functions when its threshold voltage reaches 1.8V.For this transistor to work, a voltage 25V is required between drain and source (Vdss).Using drive voltage (4.5V 10V), this device contributes to a reduction in overall power consumption.
IRF6629TR1PBF Features
a continuous drain current (ID) of 23A
a drain-to-source breakdown voltage of 25V voltage
the turn-off delay time is 20 ns
single MOSFETs transistor is 2.7mOhm
a threshold voltage of 1.8V
a 25V drain to source voltage (Vdss)
IRF6629TR1PBF Applications
There are a lot of Infineon Technologies
IRF6629TR1PBF applications of single MOSFETs transistors.
- AC-DC Power Supply
- Synchronous Rectification for ATX 1 Server I Telecom PSU
- Motor drives and Uninterruptible Power Supplies
- Micro Solar Inverter
- DC/DC converters
- Power Tools
- Motor Drives and Uninterruptible Power Supples
- Synchronous Rectification
- Battery Protection Circuit
- Telecom 1 Sever Power Supplies
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
