IRF1010EZSPBF
Or copy the link below:
- Mfr.Part #
- IRF1010EZSPBF
- Manufacturer
- Infineon Technologies
- Package / Case
- TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
- Datasheet
- Download
- Description
- MOSFET N-CH 60V 75A D2PAK
- Stock
- 24,581
- In Stock ：
- 24,581
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Infineon Technologies
- Product Category :
- Transistors - FETs, MOSFETs - Single
- Gate Charge (Qg) (Max) @ Vgs :
- 86nC @ 10V
- Vgs(th) (Max) @ Id :
- 4V @ 100µA
- Rds On (Max) @ Id, Vgs :
- 8.5mOhm @ 51A, 10V
- Length :
- 10.668mm
- Resistance :
- 8.5mOhm
- Packaging :
- Tube
- Number of Elements :
- 1
- RoHS Status :
- ROHS3 Compliant
- Package / Case :
- TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
- Width :
- 9.65mm
- Height :
- 4.826mm
- Mount :
- Surface Mount
- Element Configuration :
- Single
- Threshold Voltage :
- 4V
- Number of Pins :
- 3
- Nominal Vgs :
- 4 V
- Dual Supply Voltage :
- 60V
- Vgs (Max) :
- ±20V
- Current Rating :
- 75A
- Drain to Source Resistance :
- 8.5mOhm
- Published :
- 2004
- REACH SVHC :
- No SVHC
- Turn-Off Delay Time :
- 38 ns
- Rise Time :
- 90ns
- Rds On Max :
- 8.5 mΩ
- Fall Time (Typ) :
- 54 ns
- Lead Free :
- Lead Free
- Gate to Source Voltage (Vgs) :
- 20V
- Input Capacitance (Ciss) (Max) @ Vds :
- 2810pF @ 25V
- Series :
- HEXFET®
- Drain to Source Voltage (Vdss) :
- 60V
- Input Capacitance :
- 2.81nF
- Drain to Source Breakdown Voltage :
- 60V
- Operating Temperature :
- -55°C~175°C TJ
- Supplier Device Package :
- D2PAK
- Power Dissipation :
- 140W
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Max Operating Temperature :
- 175°C
- Turn On Delay Time :
- 19 ns
- Min Operating Temperature :
- -55°C
- Current - Continuous Drain (Id) @ 25°C :
- 75A Tc
- Drive Voltage (Max Rds On,Min Rds On) :
- 10V
- Radiation Hardening :
- No
- Mounting Type :
- Surface Mount
- Voltage - Rated DC :
- 60V
- Power Dissipation-Max :
- 140W Tc
- Continuous Drain Current (ID) :
- 75A
- FET Type :
- N-Channel
- Datasheets
- IRF1010EZSPBF
N-Channel Tube 8.5mOhm @ 51A, 10V ±20V 2810pF @ 25V 86nC @ 10V 60V TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
IRF1010EZSPBF Overview
An op amp's input capacitance is defined as the capacitance between both of its input terminals with either input grounded, and 2810pF @ 25V is its maximum input capacitance.The drain current is the maximum continuous current the device can conduct, and this device has 75A continuous drain current (ID).A drainage-to-source breakdown voltage corresponds to the voltage at which a specified value of ID flows, where VGS is 60V, and this device has a drainage-to-source breakdown voltage of 60VV.Input capacitance must be charged before drain current conduction can begin, so the turn-off delay time is 38 ns.This device has a drain-to-source resistance of 8.5mOhm when a gate-to-source voltage (VGS) is applied to bias it into the on state, and when this voltage is applied to bias it into the on state.Before drain current conduction begins, the device's input capacitance must be charged, so the delay time is 19 ns.An FET transistor's gate-source voltage, VGS, indicates how much voltage is applied across the transistor's gate-source terminal and it can range from 20V to 1.In this case, the threshold voltage of the transistor is 4V, which means that it will not activate any of its functions when its threshold voltage reaches 4V.For this transistor to work, a voltage 60V is required between drain and source (Vdss).Using drive voltage (10V), this device contributes to a reduction in overall power consumption.
IRF1010EZSPBF Features
a continuous drain current (ID) of 75A
a drain-to-source breakdown voltage of 60V voltage
the turn-off delay time is 38 ns
single MOSFETs transistor is 8.5mOhm
a threshold voltage of 4V
a 60V drain to source voltage (Vdss)
IRF1010EZSPBF Applications
There are a lot of Infineon Technologies
IRF1010EZSPBF applications of single MOSFETs transistors.
- AC-DC Power Supply
- Synchronous Rectification for ATX 1 Server I Telecom PSU
- Motor drives and Uninterruptible Power Supplies
- Micro Solar Inverter
- DC/DC converters
- Power Tools
- Motor Drives and Uninterruptible Power Supples
- Synchronous Rectification
- Battery Protection Circuit
- Telecom 1 Sever Power Supplies
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
