FDMA0104
- Mfr.Part #
- FDMA0104
- Manufacturer
- Fairchild Semiconductor
- Package / Case
- 6-WDFN Exposed Pad
- Datasheet
- Download
- Description
- TRANS MOSFET N-CH 20V 9.4A 6PIN
- Stock
- 16,522
- In Stock :
- 16,522
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Fairchild Semiconductor
- Product Category :
- Transistors - FETs, MOSFETs - Single
- Element Configuration :
- Single
- Rds On (Max) @ Id, Vgs :
- 14.5mOhm @ 9.4A, 4.5V
- Drain to Source Resistance :
- 14.5mOhm
- Height :
- 750μm
- Gate to Source Voltage (Vgs) :
- 8V
- Drain to Source Breakdown Voltage :
- 20V
- RoHS Status :
- RoHS Compliant
- Operating Temperature :
- -55°C~150°C TJ
- Max Operating Temperature :
- 150°C
- Turn On Delay Time :
- 9 ns
- Weight :
- 30mg
- Vgs(th) (Max) @ Id :
- 1V @ 250μA
- Power Dissipation-Max :
- 1.9W Ta
- FET Type :
- N-Channel
- Fall Time (Typ) :
- 6 ns
- Rds On Max :
- 14.5 mΩ
- Gate Charge (Qg) (Max) @ Vgs :
- 17.5nC @ 4.5V
- Mount :
- Surface Mount
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Current - Continuous Drain (Id) @ 25°C :
- 9.4A Ta
- Length :
- 2mm
- Series :
- PowerTrench®
- Input Capacitance (Ciss) (Max) @ Vds :
- 1680pF @ 10V
- Width :
- 2mm
- Radiation Hardening :
- No
- Drain to Source Voltage (Vdss) :
- 20V
- Package / Case :
- 6-WDFN Exposed Pad
- Continuous Drain Current (ID) :
- 9.4A
- Min Operating Temperature :
- -55°C
- Packaging :
- Tape and Reel (TR)
- Number of Pins :
- 6
- Mounting Type :
- Surface Mount
- Supplier Device Package :
- 6-MicroFET (2x2)
- Published :
- 2009
- Input Capacitance :
- 1.68nF
- Number of Elements :
- 1
- Power Dissipation :
- 700mW
- Rise Time :
- 6ns
- Turn-Off Delay Time :
- 37 ns
- Datasheets
- FDMA0104

N-Channel Tape & Reel (TR) 14.5mOhm @ 9.4A, 4.5V 1680pF @ 10V 17.5nC @ 4.5V 20V 6-WDFN Exposed Pad
FDMA0104 Overview
With either input grounded, the input capacitance parameter, CI, represents the capacitance between the input terminals of the op amp. This device has a maximum input capacitance of 1680pF @ 10V.A device's drain current is its maximum continuous current, and this device has a continuous drain current (ID) of 9.4A.With a drain-source breakdown voltage of 20V and a drain-source current flow rate of 1, this device has a drain-source breakdown voltage of 20V.The turn-off delay time is the amount of time it takes to charge the input capacitance of the device before drain current conduction can begin, and it is 37 ns.When a specific gate-to-source voltage (VGS) is applied to bias a MOSFET into the on state, a drain-to-source resistance of 14.5mOhm exists between the drain and source.Input capacitance charging takes time before drain current conduction begins, so the turn-on delay time is 9 ns.Single MOSFETs transistor is the voltage that falls across the gate-source terminal of a FET transistor that is called the gate-source voltage, VGS.Single MOSFETs transistor is necessary to have a drain to source voltage (Vdss) of 20V.
FDMA0104 Features
a continuous drain current (ID) of 9.4A
a drain-to-source breakdown voltage of 20V voltage
the turn-off delay time is 37 ns
single MOSFETs transistor is 14.5mOhm
a 20V drain to source voltage (Vdss)
FDMA0104 Applications
There are a lot of ON Semiconductor
FDMA0104 applications of single MOSFETs transistors.
- Lighting
- Uninterruptible Power Supply
- AC-DC Power Supply
- Synchronous Rectification for ATX 1 Server I Telecom PSU
- Motor drives and Uninterruptible Power Supplies
- Micro Solar Inverter
- DC/DC converters
- Power Tools
- Motor Drives and Uninterruptible Power Supples
- Synchronous Rectification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















