IRL3715ZPBF
- Mfr.Part #
- IRL3715ZPBF
- Manufacturer
- International Rectifier
- Package / Case
- TO-220-3
- Datasheet
- Download
- Description
- MOSFET N-CH 20V 50A TO220AB
- Stock
- 11,802
- In Stock :
- 11,802
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- International Rectifier
- Product Category :
- Transistors - FETs, MOSFETs - Single
- Mount :
- Through Hole
- Continuous Drain Current (ID) :
- 50A
- Max Operating Temperature :
- 175°C
- Min Operating Temperature :
- -55°C
- Height :
- 8.77mm
- Recovery Time :
- 14 ns
- Series :
- HEXFET®
- Package / Case :
- TO-220-3
- Threshold Voltage :
- 2.1V
- Resistance :
- 11mOhm
- Radiation Hardening :
- No
- Mounting Type :
- Through Hole
- Vgs(th) (Max) @ Id :
- 2.55V @ 250µA
- Packaging :
- Tube
- Published :
- 2004
- Current Rating :
- 50A
- RoHS Status :
- RoHS Compliant
- Drain to Source Resistance :
- 15.5MOhm
- Lead Free :
- Lead Free
- Width :
- 4.69mm
- Drain to Source Voltage (Vdss) :
- 20V
- Input Capacitance :
- 870pF
- Drive Voltage (Max Rds On,Min Rds On) :
- 4.5V 10V
- Rds On (Max) @ Id, Vgs :
- 11mOhm @ 15A, 10V
- Input Capacitance (Ciss) (Max) @ Vds :
- 870pF @ 10V
- REACH SVHC :
- No SVHC
- Current - Continuous Drain (Id) @ 25°C :
- 50A Tc
- Power Dissipation :
- 45W
- Power Dissipation-Max :
- 45W Tc
- Supplier Device Package :
- TO-220AB
- Gate Charge (Qg) (Max) @ Vgs :
- 11nC @ 4.5V
- Turn-Off Delay Time :
- 11 ns
- Operating Temperature :
- -55°C~175°C TJ
- FET Type :
- N-Channel
- Vgs (Max) :
- ±20V
- Turn On Delay Time :
- 7.1 ns
- Length :
- 10.54mm
- Voltage - Rated DC :
- 20V
- Rds On Max :
- 11 mΩ
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Gate to Source Voltage (Vgs) :
- 20V
- Fall Time (Typ) :
- 4.6 ns
- Rise Time :
- 44ns
- Number of Pins :
- 3
- Drain to Source Breakdown Voltage :
- 20V
- Datasheets
- IRL3715ZPBF

N-Channel Tube 11mOhm @ 15A, 10V ±20V 870pF @ 10V 11nC @ 4.5V 20V TO-220-3
IRL3715ZPBF Overview
An op amp's input capacitance is defined as the capacitance between both of its input terminals with either input grounded, and 870pF @ 10V is its maximum input capacitance.The drain current is the maximum continuous current the device can conduct, and this device has 50A continuous drain current (ID).A drainage-to-source breakdown voltage corresponds to the voltage at which a specified value of ID flows, where VGS is 20V, and this device has a drainage-to-source breakdown voltage of 20VV.Input capacitance must be charged before drain current conduction can begin, so the turn-off delay time is 11 ns.This device has a drain-to-source resistance of 15.5mOhm when a gate-to-source voltage (VGS) is applied to bias it into the on state, and when this voltage is applied to bias it into the on state.Before drain current conduction begins, the device's input capacitance must be charged, so the delay time is 7.1 ns.An FET transistor's gate-source voltage, VGS, indicates how much voltage is applied across the transistor's gate-source terminal and it can range from 20V to 1.In this case, the threshold voltage of the transistor is 2.1V, which means that it will not activate any of its functions when its threshold voltage reaches 2.1V.For this transistor to work, a voltage 20V is required between drain and source (Vdss).Using drive voltage (4.5V 10V), this device contributes to a reduction in overall power consumption.
IRL3715ZPBF Features
a continuous drain current (ID) of 50A
a drain-to-source breakdown voltage of 20V voltage
the turn-off delay time is 11 ns
single MOSFETs transistor is 15.5mOhm
a threshold voltage of 2.1V
a 20V drain to source voltage (Vdss)
IRL3715ZPBF Applications
There are a lot of Infineon Technologies
IRL3715ZPBF applications of single MOSFETs transistors.
- AC-DC Power Supply
- Synchronous Rectification for ATX 1 Server I Telecom PSU
- Motor drives and Uninterruptible Power Supplies
- Micro Solar Inverter
- DC/DC converters
- Power Tools
- Motor Drives and Uninterruptible Power Supples
- Synchronous Rectification
- Battery Protection Circuit
- Telecom 1 Sever Power Supplies
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















