IRFIBF30GPBF
- Mfr.Part #
- IRFIBF30GPBF
- Manufacturer
- Vishay
- Package / Case
- TO-220-3 Full Pack, Isolated Tab
- Datasheet
- Download
- Description
- MOSFET N-CH 900V 1.9A TO220-3
- Stock
- 7,772
- In Stock :
- 7,772
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Vishay
- Product Category :
- Transistors - FETs, MOSFETs - Single
- Turn-Off Delay Time :
- 90 ns
- Input Capacitance (Ciss) (Max) @ Vds :
- 1200pF @ 25V
- Lead Free :
- Lead Free
- Continuous Drain Current (ID) :
- 1.9A
- Number of Pins :
- 3
- Mounting Type :
- Through Hole
- Weight :
- 6.000006g
- Width :
- 4.83mm
- Rise Time :
- 25ns
- Length :
- 10.63mm
- Drive Voltage (Max Rds On,Min Rds On) :
- 10V
- Number of Channels :
- 1
- Published :
- 2014
- Min Operating Temperature :
- -55°C
- Dual Supply Voltage :
- 900V
- Current Rating :
- 1.9A
- Drain to Source Breakdown Voltage :
- 900V
- Vgs(th) (Max) @ Id :
- 4V @ 250µA
- Vgs (Max) :
- ±20V
- Package / Case :
- TO-220-3 Full Pack, Isolated Tab
- Fall Time (Typ) :
- 30 ns
- Packaging :
- Tube
- Element Configuration :
- Single
- Isolation Voltage :
- 2.5kV
- Gate to Source Voltage (Vgs) :
- 20V
- Operating Temperature :
- -55°C~150°C TJ
- Nominal Vgs :
- 4 V
- Factory Lead Time :
- 8 Weeks
- Height :
- 9.8mm
- Voltage - Rated DC :
- 900V
- Power Dissipation-Max :
- 35W Tc
- Supplier Device Package :
- TO-220-3
- Resistance :
- 3.7Ohm
- Current - Continuous Drain (Id) @ 25°C :
- 1.9A Tc
- Termination :
- Through Hole
- Drain to Source Voltage (Vdss) :
- 900V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Max Operating Temperature :
- 150°C
- Turn On Delay Time :
- 14 ns
- Number of Elements :
- 1
- FET Type :
- N-Channel
- REACH SVHC :
- Unknown
- RoHS Status :
- ROHS3 Compliant
- Power Dissipation :
- 35W
- Mount :
- Through Hole
- Gate Charge (Qg) (Max) @ Vgs :
- 78nC @ 10V
- Input Capacitance :
- 1.2nF
- Drain to Source Resistance :
- 3.7Ohm
- Rds On (Max) @ Id, Vgs :
- 3.7Ohm @ 1.1A, 10V
- Threshold Voltage :
- 4V
- Rds On Max :
- 3.7 Ω
- Datasheets
- IRFIBF30GPBF

N-Channel Tube 3.7Ohm @ 1.1A, 10V ±20V 1200pF @ 25V 78nC @ 10V 900V TO-220-3 Full Pack, Isolated Tab
IRFIBF30GPBF Overview
CI refers to the capacitance between two input terminals on an op amp with either input grounded, and this device's maximum input capacitance is 1200pF @ 25V.In this device, the drain current (ID) is equal to the continuous current transistor can conduct.This device has 900V drain-to-source breakdown voltage, where VDS corresponds to the ID at which a specified value of ID flows and VGS equals 900V.As a result of its turn-off delay time, which is 90 ns, the device has taken time to charge its input capacitance before drain current conduction begins.In a MOSFET, Drain to Source Resistance is the resistance between the drain and the source when gate-to-source voltage (VGS) is applied to bias it into the on state; in this device, this resistance is 3.7Ohm.Input capacitance charge delays drain current conduction until the time it takes to charge input capacitance reaches 14 ns.Gate-source voltages (VGS) are voltages that fall across the gate-source terminal of FET transistors. VGS is sometimes 20VV.The threshold voltage is the point at which an electrical device activates any one of its operations, which for this transistor is 4V.The transistor must receive a 900V drain to source voltage (Vdss) in order to function.In addition to reducing power consumption, this device uses drive voltage (10V).
IRFIBF30GPBF Features
a continuous drain current (ID) of 1.9A
a drain-to-source breakdown voltage of 900V voltage
the turn-off delay time is 90 ns
single MOSFETs transistor is 3.7Ohm
a threshold voltage of 4V
a 900V drain to source voltage (Vdss)
IRFIBF30GPBF Applications
There are a lot of Vishay Siliconix
IRFIBF30GPBF applications of single MOSFETs transistors.
- DC/DC converters
- Power Tools
- Motor Drives and Uninterruptible Power Supples
- Synchronous Rectification
- Battery Protection Circuit
- Telecom 1 Sever Power Supplies
- Industrial Power Supplies
- PFC stages, hard switching PWM stages and resonant switching
- PWM stages for e.g. PC Silverbox, Adapter, LCD & PDP TV,
- Lighting, Server, Telecom and UPS.
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















