LT6201CS8#PBF
- Mfr.Part #
- LT6201CS8#PBF
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- SOIC-8
- Datasheet
- Download
- Description
- IC BUFFER 2 CIRCUIT 8SO
- Stock
- 32,328
- In Stock :
- 32,328
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Max Dual Supply Voltage :
- 6.3 V
- Amplifier Type :
- High Speed
- Power Supplies :
- 3/5/+-5 V
- Micropower :
- No
- Unity Gain Bandwidth Product :
- 145
- Seated Height-Max :
- 1.752 mm
- HTS Code :
- 8542.33.00.01
- Terminal Position :
- Dual
- Slew Rate :
- 44(V/us)
- Peak Reflow Temperature (Cel) :
- 260
- Schedule B :
- 8542330000
- Shut Down Feature :
- No
- Voltage Gain in dB :
- 101.58(dB)
- Power Supply Rejection Ratio (PSRR) :
- 60 dB
- Mounting Style :
- SMD/SMT
- Packaging :
- Rail/Tube
- Terminal Form :
- Gull wing
- Product Type :
- Op Amps - High Speed Operational Amplifiers
- Height :
- 1.48 mm
- Low-Offset :
- No
- Product Category :
- High Speed Operational Amplifiers
- Single Supply Voltage (Min) :
- 2.5(V)
- Supply Current-Max :
- 58 mA
- Terminal Finish :
- Matte Tin (Sn)
- Power Supply Rejection Ratio :
- 60(dB)
- Product Status :
- Obsolete
- Dual Supply Voltage :
- 5 V
- Mounting :
- Surface Mount
- Voltage Gain dB :
- -
- Input Type :
- Rail-to-Rail
- Base Product Number :
- R5F10
- Package Type :
- SOIC N
- Dual Supply Voltage (Typ) :
- ±3/±5(V)
- Supply Current :
- 40@5V(mA)
- ECCN Code :
- EAR99
- Single Supply Voltage (Max) :
- 12.6(V)
- Bias Current-Max (IIB) @25C :
- 18 µA
- Number of Terminals :
- 8
- Minimum Operating Temperature :
- 0 C
- Package :
- Tray
- Nominal Gain Bandwidth Product :
- 165 MHz
- Lead Free :
- Lead Free
- Supplier Device Package :
- 8-SO
- Reach Compliance Code :
- Compliant
- Min Dual Supply Voltage :
- 1.25 V
- Min Supply Voltage :
- 2.5 V
- Width :
- 3.99 mm
- Unity Gain BW-Nom :
- 165000 kHz
- Mounting Type :
- Surface Mount
- Single Supply Voltage (Typ) :
- 3/5/9/12(V)
- Maximum Input Offset Current :
- 5@5V
- Terminal Pitch :
- 1.27 mm
- JESD-609 Code :
- e3
- Subcategory :
- Amplifier ICs
- Power Supply Requirement :
- Single/Dual
- Technology :
- Bipolar
- Neg Supply Voltage-Nom (Vsup) :
- -5 V
- Max Operating Temperature :
- 70 °C
- Wideband :
- yes
- Manufacturer Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Input Offset Voltage :
- 2(mV)
- Radiation Hardening :
- No
- Series :
- -
- Low-Bias :
- No
- Current - Output / Channel :
- 90 mA
- Dual Supply Voltage (Max) :
- ±6.3(V)
- Output Type :
- Rail-to-Rail
- Brand Name :
- Linear Technology
- Type :
- Low Noise Amplifier
- Length :
- 5 mm
- Gain Bandwidth Product :
- 145 MHz
- Output Current per Channel :
- 90 mA
- Operating Supply Current :
- 20 mA
- Surface Mount :
- yes
- Input Bias Current :
- 18 µA
- Shutdown :
- No Shutdown
- Programmable Power :
- No
- Dual Supply Voltage (Min) :
- ±1.25(V)
- Product :
- Operational Amplifiers
- Operating Temperature Classification :
- COMMERCIAL
- Common Mode Rejection Ratio :
- 65(dB)
- Number of Functions :
- 2
- Average Bias Current-Max (IIB) :
- 18 µA
- Pin Count :
- 8
- Settling Time :
- 0.165(us)
- Number of Channels :
- 2
- Temperature Grade :
- COMMERCIAL
- Input Offset Voltage-Max :
- 7500 µV
- Input Offset Voltage (Vos) :
- 1 mV
- Voltage Gain-Min :
- 7500
- Operating Temp Range :
- 0C to 70C
- Rad Hardened :
- No
- Package / Case :
- SOIC-8
- Power :
- No
- Supply Voltage Limit-Max :
- 6.3 V
- Brand :
- Analog Devices
- Voltage - Input Offset :
- 2.5 mV
- Number of Circuits :
- 2
- RoHS :
- Compliant
- Number of Pins :
- 8
- Package Shape :
- RECTANGULAR
- Maximum Operating Temperature :
- + 70 C
- Operating Temperature :
- 0°C ~ 70°C
- Operating Supply Voltage :
- 12 V
- Slew Rate-Min :
- 29 V/us
- Current - Supply :
- 20mA (x2 Channels)
- Lifecycle Status :
- Production (Last Updated: 1 month ago)
- JESD-30 Code :
- R-PDSO-G8
- Current - Input Bias :
- 8 µA
- Voltage Gain :
- 101.58 dB
- Qualification Status :
- Not Qualified
- Manufacturer :
- Analog Devices Inc.
- Min Operating Temperature :
- 0 °C
- Number of Elements :
- 2
- Frequency Compensation :
- yes
- Architecture :
- VOLTAGE-FEEDBACK
- Max Supply Voltage :
- 12.6 V
- Datasheets
- LT6201CS8#PBF

2 Channels 90 mA per Channel 8 µA 65(dB) Instrumentational OP Amps 18 µA 12 V 8 Pins SOIC-8
LT6201CS8#PBF Overview
A SOIC-8 case is used to package the op amp. High Speed-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Rail/Tube case. There are a total of 8 pins on this op amp. It should be noted that this op amp is a type of Amplifier ICs device. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 1 mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C ~ 70°C . An 20 mA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 101.58 dB. On this instrumentation amplifier, there are 2 circuits that are connected together. There are 2 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than 0 °C degrees Celsius. It should only be used at temperatures up above 70 °C. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 12 V. As a recommendation, this electronic component should be used with a power supply that can deliver 20mA (x2 Channels). I would like to point out that this electrical component is capable of working from a voltage below 12.6 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.5 V at all times. The dual supply voltage of 6.3 V should be used for the conduct of this electronic component. The - indicates the series number of the op amp. There is a minimum voltage gain of 7500 that this buffer op amp is capable of conducting. In order to connect the buffer amplifier to the wires, it is equipped with 8 terminals.
LT6201CS8#PBF Features
8 Pins
101.58 dB voltage gain
Output Type: Rail-to-Rail
8Terminations
LT6201CS8#PBF Applications
There are a lot of Analog Devices
LT6201CS8#PBF Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















