LT6200CS6-10#TRMPBF
- Mfr.Part #
- LT6200CS6-10#TRMPBF
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- SOT-23-6 Thin, TSOT-23-6
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT TSOT23-6
- Stock
- 30,297
- In Stock :
- 30,297
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Lifecycle Status :
- Production (Last Updated: 3 weeks ago)
- Number of Channels :
- 1
- Number of Elements :
- 1
- Number of Terminals :
- 6
- Operating Supply Current :
- 20 mA
- Subcategory :
- Operational Amplifier
- Brand Name :
- Analog Devices Inc
- Power Supply Rejection Ratio (PSRR) :
- 60 dB
- JESD-30 Code :
- R-PDSO-G6
- Min Supply Voltage :
- 2.5 V
- Temperature Grade :
- COMMERCIAL
- Reach Compliance Code :
- Compliant
- Length :
- 2.9 mm
- RoHS :
- Compliant
- Output Current per Channel :
- 90 mA
- Package / Case :
- SOT-23-6 Thin, TSOT-23-6
- Min Dual Supply Voltage :
- 1.25 V
- Mounting Style :
- SMD/SMT
- Base Product Number :
- LT6200
- Pbfree Code :
- No
- Common Mode Rejection Ratio :
- 65 dB
- Supplier Device Package :
- TSOT-23-6
- Output Type :
- Rail-to-Rail
- Number of Circuits :
- 1
- Terminal Pitch :
- 0.95 mm
- Supply Voltage Limit-Max :
- 6.3 V
- Surface Mount :
- yes
- Voltage - Input Offset :
- 2.5 mV
- Min Operating Temperature :
- 0 °C
- Minimum Operating Temperature :
- 0 C
- Slew Rate :
- 340 V/µs
- Product Status :
- Active
- Input Offset Voltage (Vos) :
- 1 mV
- Voltage Gain dB :
- -
- Voltage Gain :
- 101.58 dB
- Max Dual Supply Voltage :
- 6.3 V
- JESD-609 Code :
- e3
- Mounting Type :
- Surface Mount
- Maximum Operating Temperature :
- + 70 C
- Gain Bandwidth Product :
- 1.45 GHz
- Width :
- 1.625 mm
- Manufacturer Lifecycle Status :
- Production (Last Updated: 3 weeks ago)
- Technology :
- Bipolar
- Input Bias Current :
- 23 µA
- Peak Reflow Temperature (Cel) :
- 260
- Qualification Status :
- Not Qualified
- Average Bias Current-Max (IIB) :
- 18 µA
- Current - Supply :
- 20mA
- Manufacturer :
- Analog Devices Inc
- Package Shape :
- RECTANGULAR
- Max Supply Voltage :
- 12.6 V
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Current - Input Bias :
- 23 µA
- Neg Supply Voltage-Nom (Vsup) :
- -5 V
- Amplifier Type :
- GENERAL PURPOSE
- Product Type :
- Op Amps - High Speed Operational Amplifiers
- Terminal Finish :
- MATTE TIN
- Unity Gain BW-Nom :
- 1600000 kHz
- Nominal Gain Bandwidth Product :
- 1.45 GHz
- Pin Count :
- 6
- Number of Functions :
- 1
- Operating Temperature :
- 0°C ~ 70°C
- Series :
- -
- Seated Height-Max :
- 1 mm
- Terminal Form :
- Gull wing
- Number of Pins :
- 6
- Terminal Position :
- Dual
- Input Offset Voltage-Max :
- 7500 µV
- Max Operating Temperature :
- 70 °C
- Datasheets
- LT6200CS6-10#TRMPBF

1 Channels 90 mA per Channel 23 µA 65 dB Instrumentational OP Amps 18 µA 6 Pins SOT-23-6 Thin, TSOT-23-6
LT6200CS6-10#TRMPBF Overview
A SOT-23-6 Thin, TSOT-23-6 case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. There are a total of 6 pins on this op amp. It should be noted that this op amp is a type of Operational Amplifier device. There are 6 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 1 mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C ~ 70°C . An 20 mA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 101.58 dB. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than 0 °C degrees Celsius. It should only be used at temperatures up above 70 °C. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. As a recommendation, this electronic component should be used with a power supply that can deliver 20mA. I would like to point out that this electrical component is capable of working from a voltage below 12.6 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.5 V at all times. The dual supply voltage of 6.3 V should be used for the conduct of this electronic component. The - indicates the series number of the op amp. In order to connect the buffer amplifier to the wires, it is equipped with 6 terminals.
LT6200CS6-10#TRMPBF Features
6 Pins
101.58 dB voltage gain
Output Type: Rail-to-Rail
6Terminations
LT6200CS6-10#TRMPBF Applications
There are a lot of Analog Devices
LT6200CS6-10#TRMPBF Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















