TIBPAL22V10ACFN
Or copy the link below:
- Mfr.Part #
- TIBPAL22V10ACFN
- Manufacturer
- Texas Instruments
- Package / Case
- 28-LCC (J-Lead)
- Datasheet
- Download
- Description
- IC PLD 10MC 10NS 28PLCC
- Stock
- 31,063
- In Stock ：
- 31,063
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- PLDs (Programmable Logic Device)
- Number of Macro Cells :
- 10
- Nominal Supply Current :
- 180mA
- Programmable Type :
- PAL
- Max Supply Voltage :
- 5.25V
- Number of Product Terms :
- 132
- Number of Pins :
- 28
- Weight :
- 1.182714g
- Terminal Form :
- J BEND
- Number of I/O :
- 10
- Output Function :
- MACROCELL
- Lead Free :
- Contains Lead
- Package / Case :
- 28-LCC (J-Lead)
- Terminal Pitch :
- 1.27mm
- Number of Dedicated Inputs :
- 11
- Min Operating Temperature :
- 0°C
- Width :
- 11.5062mm
- Power Supplies :
- 5V
- Min Supply Voltage :
- 4.75V
- Max Operating Temperature :
- 75°C
- Number of Terminations :
- 28
- Propagation Delay :
- 25 ns
- Mounting Type :
- Surface Mount
- Mount :
- Surface Mount, Through Hole
- Turn On Delay Time :
- 25 ns
- Supply Voltage :
- 5V
- Terminal Finish :
- Matte Tin (Sn)
- REACH SVHC :
- No SVHC
- Operating Supply Voltage :
- 5V
- Terminal Position :
- QUAD
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Pin Count :
- 28
- Temperature Grade :
- COMMERCIAL EXTENDED
- Number of Gates :
- 500
- Series :
- IMPACT-X™ PAL®
- RoHS Status :
- Non-RoHS Compliant
- Height Seated (Max) :
- 4.57mm
- Base Part Number :
- PAL22V10
- HTS Code :
- 8542.39.00.01
- JESD-609 Code :
- e3
- Pbfree Code :
- No
- Radiation Hardening :
- No
- Packaging :
- Tube
- Number of Outputs :
- 10
- Peak Reflow Temperature (Cel) :
- 220
- Length :
- 11.5062mm
- Frequency :
- 28.5MHz
- Max Supply Current :
- 180mA
- Datasheets
- TIBPAL22V10ACFN
Surface Mount PAL IMPACT-X™ PAL® 28-LCC (J-Lead) Tube 10 Macro Cells PAL22V10 28 Pins
TIBPAL22V10ACFN Overview
A Type Surface Mount mount is used to mount the PLD stock.This PAL type of PLD Programmable logic device is programmable.The best value on the market can be found in IMPACT-X™ PAL® Series' performance-cost ratio.As a result of Programmable logic array's package, the 28-LCC (J-Lead) is widely used in electronics.In Programmable array logic's Packaging, Tube-materials are used.Every macro cell has a 10 value.The number PAL22V10 refers to the PLD stock's largest part.There is a Surface Mount, Through Hole-mount for the PLD.Complex Programmable logic device 28 has the same pin number as before.The PLD can still operate precisely at frequency 28.5MHz.Current maximum working temperatures are 75°C.It should be warmer than 0°C when in Programmable logic device's operation.You can only use it with a Supply Voltage of 4.75V volts.Only 5.25V Supply Voltage will work with Programmable logic controller.There are 10 programmable I/Os on this PLD.At all times, 5V powers the Complex Programmable logic device.The board is equipped with 11-dedicated inputs.The termination is set to 28.Supplies for the Programmable logic device are 5V.There are 132 product terms.In total, there are numerous 10 outputs.A voltage of 5V is required for Programmable logic array's operation.Board 28 pins serve specific purposes.As far as supply temperature is concerned, it can work with a maximum of 180mA.As well as 500 gates, there are others.
TIBPAL22V10ACFN Features
Mounting type of Surface Mount
Maximum temperature of 75°C
10 I/Os
TIBPAL22V10ACFN Applications
There are a lot of Texas Instruments
TIBPAL22V10ACFN PLDs (Programmable Logic Device) applications.
- Power-limited applications
- High-speed Devices
- Electrically Devices
- Programmable Logic Devices
- High performance applications
- Low power applications
- Battery operated devices
- High-end communication equipment
- high-performance microcomputer systems
- Microcomputer systems
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
