TIBPAL16L8-10CFN
- Mfr.Part #
- TIBPAL16L8-10CFN
- Manufacturer
- Texas Instruments
- Package / Case
- 20-LCC (J-Lead)
- Datasheet
- Download
- Description
- IC PLD 10NS 20PLCC
- Stock
- 17,290
- In Stock :
- 17,290
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- PLDs (Programmable Logic Device)
- Power Supplies :
- 5V
- Supply Voltage :
- 5V
- Propagation Delay :
- 10 ns
- Number of Outputs :
- 8
- Temperature Grade :
- COMMERCIAL EXTENDED
- Radiation Hardening :
- No
- Lead Free :
- Lead Free
- Number of Pins :
- 20
- Terminal Position :
- QUAD
- Min Operating Temperature :
- 0°C
- Frequency :
- 85MHz
- Terminal Pitch :
- 1.27mm
- Output Function :
- COMBINATORIAL
- Access Time :
- 10 ns
- Base Part Number :
- TIBPAL16L8
- Pbfree Code :
- yes
- Programmable Type :
- PAL
- Number of Product Terms :
- 64
- Pin Count :
- 20
- Max Supply Current :
- 180mA
- Package / Case :
- 20-LCC (J-Lead)
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Terminal Form :
- J BEND
- Peak Reflow Temperature (Cel) :
- 245
- Operating Supply Voltage :
- 5V
- Number of Dedicated Inputs :
- 10
- Number of Terminations :
- 20
- RoHS Status :
- ROHS3 Compliant
- REACH SVHC :
- No SVHC
- Weight :
- 722.005655mg
- Number of I/O :
- 6
- Min Supply Voltage :
- 4.75V
- Max Operating Temperature :
- 75°C
- Mounting Type :
- Surface Mount
- Nominal Supply Current :
- 180mA
- HTS Code :
- 8542.39.00.01
- Height Seated (Max) :
- 4.57mm
- Packaging :
- Tube
- Turn On Delay Time :
- 10 ns
- Series :
- IMPACT-X™ PAL®
- Max Supply Voltage :
- 5.25V
- JESD-609 Code :
- e4
- Mount :
- Surface Mount
- Datasheets
- TIBPAL16L8-10CFN

Surface Mount PAL IMPACT-X™ PAL® 20-LCC (J-Lead) Tube TIBPAL16L8 20 Pins
TIBPAL16L8-10CFN Overview
Mounting is done with the Type Surface Mount method.Program type of PLD Programmable logic device PAL is programmable.IMPACT-X™ PAL® Series provides the best value on the market in terms of performance-cost ratio.20-LCC (J-Lead) has a package, so Programmable logic devices are widely used in electronics.The use of Tube-materials in Programmable array logic's Packaging is widespread.In this PLD stock, TIBPAL16L8 represents the biggest part.Mounting the PLD is in the direction of Surface Mount.Complex Programmable logic device 20 remains Programmable logic array's pin number.Even at the frequency of 85MHz, it can function accurately.Programmable logic devices are currently 75°C degrees Celsius that can be used as a maximum working temperature.As soon as Programmable logic devices are Programmable logic device's operational, it should be warmer than 0°C.There is only one operating voltage required: 4.75V volts.It can only be powered by a 5.25V supply voltage.You can program Programmable logic array's 6 I/Os.Power is always provided by 5V.Inputs are dedicated to 10 on this board.In it, a 20 termination has been programmed.The Programmable logic device is supplied by 5V.Product terms are represented by 64.Programmable logic devices are possible to output 8 in a number of ways.5V voltage is required in order to operate it.A board with 20 pins has specific purposes.If the supply temperature is not higher than 180mA, it will not work.
TIBPAL16L8-10CFN Features
Mounting type of Surface Mount
Maximum temperature of 75°C
6 I/Os
TIBPAL16L8-10CFN Applications
There are a lot of Texas Instruments
TIBPAL16L8-10CFN PLDs (Programmable Logic Device) applications.
- Power-limited applications
- High-speed Devices
- Electrically Devices
- Programmable Logic Devices
- High performance applications
- Low power applications
- Battery operated devices
- High-end communication equipment
- high-performance microcomputer systems
- Microcomputer systems
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















