TIBPAL16R4-10CFN
Or copy the link below:
- Mfr.Part #
- TIBPAL16R4-10CFN
- Manufacturer
- Texas Instruments
- Package / Case
- 20-LCC (J-Lead)
- Datasheet
- Download
- Description
- IC PLD 10NS 20PLCC
- Stock
- 2,407
- In Stock ：
- 2,407
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- PLDs (Programmable Logic Device)
- Temperature Grade :
- COMMERCIAL EXTENDED
- Number of Outputs :
- 8
- Output Function :
- MIXED
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Mounting Type :
- Surface Mount
- Pbfree Code :
- yes
- Series :
- IMPACT-X™ PAL®
- Length :
- 8.9662mm
- Max Supply Voltage :
- 5.25V
- Peak Reflow Temperature (Cel) :
- 245
- Frequency :
- 85MHz
- Programmable Type :
- PAL
- Radiation Hardening :
- No
- Supply Voltage :
- 5V
- Weight :
- 722.005655mg
- Packaging :
- Tube
- Terminal Form :
- J BEND
- Number of Pins :
- 20
- Number of Product Terms :
- 64
- Max Supply Current :
- 180mA
- Turn On Delay Time :
- 10 ns
- Operating Supply Voltage :
- 5V
- Base Part Number :
- TIBPAL16R4
- REACH SVHC :
- Unknown
- Propagation Delay :
- 10 ns
- Max Operating Temperature :
- 75°C
- Number of Terminations :
- 20
- Pin Count :
- 20
- Min Operating Temperature :
- 0°C
- Number of Dedicated Inputs :
- 8
- Power Supplies :
- 5V
- Package / Case :
- 20-LCC (J-Lead)
- Min Supply Voltage :
- 4.75V
- Mount :
- Surface Mount, Through Hole
- Terminal Pitch :
- 1.27mm
- JESD-609 Code :
- e4
- Terminal Position :
- QUAD
- Width :
- 8.9662mm
- Nominal Supply Current :
- 180mA
- Lead Free :
- Lead Free
- Number of I/O :
- 4
- Additional Feature :
- POWER-UP RESET; REGISTER PRELOAD
- RoHS Status :
- ROHS3 Compliant
- Datasheets
- TIBPAL16R4-10CFN
Surface Mount PAL IMPACT-X™ PAL® 20-LCC (J-Lead) Tube TIBPAL16R4 20 Pins
TIBPAL16R4-10CFN Overview
A Type Surface Mount mount is used to mount the PLD stock.This PAL type of PLD Programmable logic device is programmable.The best value on the market can be found in IMPACT-X™ PAL® Series' performance-cost ratio.As a result of Programmable logic array's package, the 20-LCC (J-Lead) is widely used in electronics.In Programmable array logic's Packaging, Tube-materials are used.The number TIBPAL16R4 refers to the PLD stock's largest part.There is a Surface Mount, Through Hole-mount for the PLD.Complex Programmable logic device 20 has the same pin number as before.The PLD can still operate precisely at frequency 85MHz.Current maximum working temperatures are 75°C.It should be warmer than 0°C when in Programmable logic device's operation.You can only use it with a Supply Voltage of 4.75V volts.Only 5.25V Supply Voltage will work with Programmable logic controller.There are 4 programmable I/Os on this PLD.At all times, 5V powers the Complex Programmable logic device.The board is equipped with 8-dedicated inputs.The termination is set to 20.Supplies for the Programmable logic device are 5V.There are 64 product terms.In total, there are numerous 8 outputs.A voltage of 5V is required for Programmable logic array's operation.Board 20 pins serve specific purposes.As far as supply temperature is concerned, it can work with a maximum of 180mA.The list of additional features includes POWER-UP RESET; REGISTER PRELOAD, for example.
TIBPAL16R4-10CFN Features
Mounting type of Surface Mount
Maximum temperature of 75°C
4 I/Os
TIBPAL16R4-10CFN Applications
There are a lot of Texas Instruments
TIBPAL16R4-10CFN PLDs (Programmable Logic Device) applications.
- Power-limited applications
- High-speed Devices
- Electrically Devices
- Programmable Logic Devices
- High performance applications
- Low power applications
- Battery operated devices
- High-end communication equipment
- high-performance microcomputer systems
- Microcomputer systems
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
