TIBPAL16L8-7CN

Share

Or copy the link below:

Mfr.Part #
TIBPAL16L8-7CN
Manufacturer
Texas Instruments
Package / Case
20-DIP (0.300, 7.62mm)
Datasheet
Download
Description
IC PLD 7NS 20DIP
Stock
5,278
In Stock :
5,278

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Texas Instruments
Product Category :
PLDs (Programmable Logic Device)
REACH SVHC :
No SVHC
Terminal Pitch :
2.54mm
Output Function :
COMBINATORIAL
Number of I/O :
6
Number of Product Terms :
64
Package / Case :
20-DIP (0.300, 7.62mm)
Length :
24.325mm
Radiation Hardening :
No
Turn On Delay Time :
7.5 ns
Base Part Number :
TIBPAL16L8
Access Time :
7 ns
Number of Dedicated Inputs :
10
Mount :
Through Hole
Terminal Position :
Dual
Number of Pins :
20
Supply Voltage :
5V
Min Supply Voltage :
4.75V
Propagation Delay :
7.5 ns
Min Operating Temperature :
0°C
Number of Circuits :
8
RoHS Status :
ROHS3 Compliant
Lead Free :
Lead Free
JESD-609 Code :
e4
Max Supply Current :
180mA
Nominal Supply Current :
210mA
Number of Outputs :
8
Operating Supply Voltage :
5V
Packaging :
Tube
Programmable Type :
PAL
Power Supplies :
5V
Frequency :
100MHz
Max Operating Temperature :
75°C
Pin Count :
20
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
Series :
IMPACT-X™ PAL®
Max Supply Voltage :
5.25V
ECCN Code :
3A991.A.2
Pbfree Code :
yes
Mounting Type :
Through Hole
Temperature Grade :
COMMERCIAL EXTENDED
Number of Terminations :
20
Datasheets
TIBPAL16L8-7CN
Introducing PLDs (Programmable Logic Device) Texas Instruments TIBPAL16L8-7CN from Chip IC,where excellence meets affordability. This product stands out with its Package / Case:20-DIP (0.300, 7.62mm), Base Part Number:TIBPAL16L8, Number of Pins:20, Mounting Type:Through Hole, Number of Terminations:20, TIBPAL16L8-7CN pinout, TIBPAL16L8-7CN datasheet PDF, TIBPAL16L8-7CN amp .Beyond PLDs (Programmable Logic Device) Texas Instruments TIBPAL16L8-7CN ,we also offer EP22V10PC-15, EP22V10ELC-15, ATF16LV8C-15SC, Our vast inventory has you covered. Contact us now for immediate solutions.

Texas Instruments TIBPAL16L8-7CN


Through Hole PAL IMPACT-X™ PAL® 20-DIP (0.300, 7.62mm) Tube TIBPAL16L8 20 Pins

TIBPAL16L8-7CN Overview


The PLD stock is mounted with Type Through Hole screws.It has a type of PLD Programmable logic device  of PAL programmable.As far as performance-cost ratio is concerned, IMPACT-X™ PAL® Series is the best value on the market.This 20-DIP (0.300, 7.62mm) package is widely used in the electronics industry.Packing is done with Tube-materials.This PLD stock is most notable for Programmable logic array's TIBPAL16L8-shaped biggest part.In Through Hole direction, the PLD is mounted.Pin number 20 remains the same for the Complex Programmable logic device.When Programmable logic devices are operated at 100MHz frequency, it continues to function accurately.As of now, 75°C is the maximum working temperature.It should be warmer when operating than 0°C.A supply voltage of 4.75V volts is necessary for it to function.Only a 5.25V supply voltage can be used.6 I/Os on it can be programmed.Programmable logic devices are always powered by 5V.A dedicated input for 10 is embedded in the PLD.Into it has been programmed a 20 termination.A Programmable logic device's supplies are 5V.Programmable logic devices are 64 terms that make up the product.Multiple 8 outputs exist.The Programmable logic device requires 5V voltage to operate.20 pins on the board are used for specific purposes.If you supply it with a temperature of 180mA or less, it should work.

TIBPAL16L8-7CN Features


Mounting type of Through Hole
Maximum temperature of 75°C
6 I/Os


TIBPAL16L8-7CN Applications


There are a lot of Texas Instruments
TIBPAL16L8-7CN PLDs (Programmable Logic Device) applications.


  • Power-limited applications
  • High-speed Devices
  • Electrically Devices
  • Programmable Logic Devices
  • High performance applications
  • Low power applications
  • Battery operated devices
  • High-end communication equipment
  • high-performance microcomputer systems
  • Microcomputer systems
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

RFQ
BOM