TIBPAL22V10-10CFN
Or copy the link below:
- Mfr.Part #
- TIBPAL22V10-10CFN
- Manufacturer
- Texas Instruments
- Package / Case
- 28-LCC (J-Lead)
- Datasheet
- Download
- Description
- IC PLD 10MC 10NS 28PLCC
- Stock
- 1,566
- In Stock ：
- 1,566
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- PLDs (Programmable Logic Device)
- Number of Dedicated Inputs :
- 11
- Terminal Finish :
- Tin/Lead (Sn/Pb)
- Terminal Position :
- QUAD
- Power Supplies :
- 5V
- Operating Supply Voltage :
- 5V
- Number of Pins :
- 28
- Terminal Pitch :
- 1.27mm
- HTS Code :
- 8542.31.00.01
- Turn On Delay Time :
- 15 ns
- JESD-609 Code :
- e0
- Width :
- 11.5062mm
- Mount :
- Surface Mount
- Number of Product Terms :
- 132
- Pin Count :
- 28
- Length :
- 11.5062mm
- Min Operating Temperature :
- 0°C
- Number of Macro Cells :
- 10
- Min Supply Voltage :
- 4.75V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Height Seated (Max) :
- 4.57mm
- Pbfree Code :
- No
- Supply Voltage :
- 5V
- Access Time :
- 10 ns
- Output Function :
- MACROCELL
- Number of Outputs :
- 10
- Mounting Type :
- Surface Mount
- Max Supply Voltage :
- 5.25V
- Peak Reflow Temperature (Cel) :
- 220
- Propagation Delay :
- 15 ns
- Programmable Type :
- PAL
- RoHS Status :
- ROHS3 Compliant
- Max Operating Temperature :
- 75°C
- Radiation Hardening :
- No
- Number of Terminations :
- 28
- Package / Case :
- 28-LCC (J-Lead)
- ECCN Code :
- 3A991.A.2
- Lead Free :
- Contains Lead
- Base Part Number :
- PAL22V10
- Weight :
- 1.182714g
- Frequency :
- 100MHz
- Packaging :
- Tube
- Series :
- IMPACT-X™ PAL®
- Number of I/O :
- 10
- Max Supply Current :
- 210mA
- Terminal Form :
- J BEND
- Temperature Grade :
- COMMERCIAL EXTENDED
- Datasheets
- TIBPAL22V10-10CFN
Surface Mount PAL IMPACT-X™ PAL® 28-LCC (J-Lead) Tube 10 Macro Cells PAL22V10 28 Pins
TIBPAL22V10-10CFN Overview
A Type Surface Mount mount is used to mount the PLD stock.This PAL type of PLD Programmable logic device is programmable.The best value on the market can be found in IMPACT-X™ PAL® Series' performance-cost ratio.As a result of Programmable logic array's package, the 28-LCC (J-Lead) is widely used in electronics.In Programmable array logic's Packaging, Tube-materials are used.Every macro cell has a 10 value.The number PAL22V10 refers to the PLD stock's largest part.There is a Surface Mount-mount for the PLD.Complex Programmable logic device 28 has the same pin number as before.The PLD can still operate precisely at frequency 100MHz.Current maximum working temperatures are 75°C.It should be warmer than 0°C when in Programmable logic device's operation.You can only use it with a Supply Voltage of 4.75V volts.Only 5.25V Supply Voltage will work with Programmable logic controller.There are 10 programmable I/Os on this PLD.At all times, 5V powers the Complex Programmable logic device.The board is equipped with 11-dedicated inputs.The termination is set to 28.Supplies for the Programmable logic device are 5V.There are 132 product terms.In total, there are numerous 10 outputs.A voltage of 5V is required for Programmable logic array's operation.Board 28 pins serve specific purposes.As far as supply temperature is concerned, it can work with a maximum of 210mA.
TIBPAL22V10-10CFN Features
Mounting type of Surface Mount
Maximum temperature of 75°C
10 I/Os
TIBPAL22V10-10CFN Applications
There are a lot of Texas Instruments
TIBPAL22V10-10CFN PLDs (Programmable Logic Device) applications.
- Power-limited applications
- High-speed Devices
- Electrically Devices
- Programmable Logic Devices
- High performance applications
- Low power applications
- Battery operated devices
- High-end communication equipment
- high-performance microcomputer systems
- Microcomputer systems
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
