TIBPAL20R8-25CNT
Or copy the link below:
- Mfr.Part #
- TIBPAL20R8-25CNT
- Manufacturer
- Texas Instruments
- Package / Case
- 24-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC PLD 25NS 24DIP
- Stock
- 12,754
- In Stock ：
- 12,754
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- PLDs (Programmable Logic Device)
- REACH SVHC :
- No SVHC
- Power Supplies :
- 5V
- Number of Product Terms :
- 64
- Package / Case :
- 24-DIP (0.300, 7.62mm)
- Max Supply Current :
- 105mA
- Frequency :
- 50MHz
- Programmable Type :
- PAL
- Mounting Type :
- Through Hole
- Number of Pins :
- 24
- Termination :
- Through Hole
- Radiation Hardening :
- No
- Mount :
- Through Hole
- Terminal Position :
- Dual
- Min Operating Temperature :
- 0°C
- Pin Count :
- 24
- Min Supply Voltage :
- 4.75V
- Base Part Number :
- TIBPAL20R8
- ECCN Code :
- EAR99
- Number of Dedicated Inputs :
- 12
- Max Supply Voltage :
- 5.25V
- Length :
- 31.64mm
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Supply Voltage :
- 5V
- Series :
- IMPACT-X™ PAL®
- Operating Supply Current :
- 105mA
- Access Time :
- 25 ns
- Organization :
- 12 DEDICATED INPUTS, 0 I/O
- Number of Outputs :
- 8
- Turn On Delay Time :
- 25 ns
- Width :
- 6.73mm
- Output Function :
- REGISTERED
- Max Operating Temperature :
- 75°C
- Propagation Delay :
- 25 ns
- JESD-609 Code :
- e4
- Pbfree Code :
- yes
- Height Seated (Max) :
- 5.08mm
- Additional Feature :
- REGISTER PRELOAD; POWER-UP RESET
- Packaging :
- Tube
- Terminal Pitch :
- 2.54mm
- Number of Terminations :
- 24
- Operating Supply Voltage :
- 5V
- Weight :
- 1.753503g
- HTS Code :
- 8542.39.00.01
- Lead Free :
- Lead Free
- RoHS Status :
- ROHS3 Compliant
- Temperature Grade :
- COMMERCIAL EXTENDED
- Datasheets
- TIBPAL20R8-25CNT
Through Hole PAL IMPACT-X™ PAL® 24-DIP (0.300, 7.62mm) Tube TIBPAL20R8 24 Pins
TIBPAL20R8-25CNT Overview
PLD stock mounting is Type Through Hole.It has the programmable type of PLD Programmable logic device PAL.IMPACT-X™ PAL® Series offers excellent value due to Programmable logic array's performance-cost ratio.Electronics industry users widely use the 24-DIP (0.300, 7.62mm) because of Programmable logic array's low packaging cost.Programmable array logic's Packaging is made of Tube-materials.In the PLD stock, TIBPAL20R8 corresponds to the largest part.Through Hole is the way in which the PLD is mounted.In the Complex Programmable logic device, 24 represents the pin number.Programmable logic devices are still possible to operate precisely at 50MHz frequency.In the current state, 75°C is the maximum working temperature.A 0°C warm environment is required while the machine is in Programmable logic device's operation.There is only a supply voltage of 4.75V volts that it can work with.There is no alternative to the 5.25V supply voltage for this PLD.Whenever the Complex Programmable logic device is powered, Programmable logic devices are powered from 5V.The 12 inputs are embedded into the PLD.Programming has included a 24 termination.There are 5V supplies in the Programmable logic device.In this case, 64 refers to the number of product terms available.The 8 outputs are numerous.You need 5V voltage to operate it.A variety of 24 pins are present on the board, each serving a specific purpose.At most, it can handle a supply temperature of 105mA.Additions like REGISTER PRELOAD; POWER-UP RESET are among them.This Programmable logic device is suitable for many applications since it can function at any supply voltage of 105mA.
TIBPAL20R8-25CNT Features
Mounting type of Through Hole
Maximum temperature of 75°C
TIBPAL20R8-25CNT Applications
There are a lot of Texas Instruments
TIBPAL20R8-25CNT PLDs (Programmable Logic Device) applications.
- Power-limited applications
- High-speed Devices
- Electrically Devices
- Programmable Logic Devices
- High performance applications
- Low power applications
- Battery operated devices
- High-end communication equipment
- high-performance microcomputer systems
- Microcomputer systems
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
