TIBPAL16R8-5CFN

Share

Or copy the link below:

Mfr.Part #
TIBPAL16R8-5CFN
Manufacturer
Texas Instruments
Package / Case
20-LCC (J-Lead)
Datasheet
Download
Description
IC PLD 5NS 20PLCC
Stock
41,591
In Stock :
41,591

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Texas Instruments
Product Category :
PLDs (Programmable Logic Device)
Number of Dedicated Inputs :
8
Frequency :
125MHz
Pbfree Code :
yes
Peak Reflow Temperature (Cel) :
245
Number of I/O :
8
Series :
IMPACT-X™ PAL®
Number of Product Terms :
64
Max Supply Current :
180mA
Packaging :
Tube
Pin Count :
20
RoHS Status :
ROHS3 Compliant
Access Time :
5 ns
JESD-609 Code :
e4
Power Supplies :
5V
Height Seated (Max) :
4.57mm
Propagation Delay :
5 ns
Output Function :
REGISTERED
Terminal Position :
QUAD
Temperature Grade :
COMMERCIAL EXTENDED
Number of Outputs :
8
Mount :
Surface Mount
Weight :
722.005655mg
Turn On Delay Time :
5 ns
Radiation Hardening :
No
Min Operating Temperature :
0°C
Additional Feature :
POWER-UP RESET; REGISTER PRELOAD
Terminal Form :
J BEND
Mounting Type :
Surface Mount
Supply Voltage :
5V
Lead Free :
Lead Free
Number of Terminations :
20
Terminal Pitch :
1.27mm
Package / Case :
20-LCC (J-Lead)
Number of Pins :
20
Max Supply Voltage :
5.25V
Programmable Type :
PAL
Min Supply Voltage :
4.75V
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
Max Operating Temperature :
75°C
Operating Supply Voltage :
5V
Base Part Number :
TIBPAL16R8
Datasheets
TIBPAL16R8-5CFN
Introducing PLDs (Programmable Logic Device) Texas Instruments TIBPAL16R8-5CFN from Chip IC,where excellence meets affordability. This product stands out with its Mounting Type:Surface Mount, Number of Terminations:20, Package / Case:20-LCC (J-Lead), Number of Pins:20, Base Part Number:TIBPAL16R8, TIBPAL16R8-5CFN pinout, TIBPAL16R8-5CFN datasheet PDF, TIBPAL16R8-5CFN amp .Beyond PLDs (Programmable Logic Device) Texas Instruments TIBPAL16R8-5CFN ,we also offer EP22V10PC-15, EP22V10ELC-15, ATF16LV8C-15SC, Our vast inventory has you covered. Contact us now for immediate solutions.

Texas Instruments TIBPAL16R8-5CFN


Surface Mount PAL IMPACT-X™ PAL® 20-LCC (J-Lead) Tube TIBPAL16R8 20 Pins

TIBPAL16R8-5CFN Overview


The PLD stock is mounted with Type Surface Mount screws.It has a type of PLD Programmable logic device  of PAL programmable.As far as performance-cost ratio is concerned, IMPACT-X™ PAL® Series is the best value on the market.This 20-LCC (J-Lead) package is widely used in the electronics industry.Packing is done with Tube-materials.This PLD stock is most notable for Programmable logic array's TIBPAL16R8-shaped biggest part.In Surface Mount direction, the PLD is mounted.Pin number 20 remains the same for the Complex Programmable logic device.When Programmable logic devices are operated at 125MHz frequency, it continues to function accurately.As of now, 75°C is the maximum working temperature.It should be warmer when operating than 0°C.A supply voltage of 4.75V volts is necessary for it to function.Only a 5.25V supply voltage can be used.8 I/Os on it can be programmed.Programmable logic devices are always powered by 5V.A dedicated input for 8 is embedded in the PLD.Into it has been programmed a 20 termination.A Programmable logic device's supplies are 5V.Programmable logic devices are 64 terms that make up the product.Multiple 8 outputs exist.The Programmable logic device requires 5V voltage to operate.20 pins on the board are used for specific purposes.If you supply it with a temperature of 180mA or less, it should work.In addition, POWER-UP RESET; REGISTER PRELOAD is among the additional features.

TIBPAL16R8-5CFN Features


Mounting type of Surface Mount
Maximum temperature of 75°C
8 I/Os


TIBPAL16R8-5CFN Applications


There are a lot of Texas Instruments
TIBPAL16R8-5CFN PLDs (Programmable Logic Device) applications.


  • Power-limited applications
  • High-speed Devices
  • Electrically Devices
  • Programmable Logic Devices
  • High performance applications
  • Low power applications
  • Battery operated devices
  • High-end communication equipment
  • high-performance microcomputer systems
  • Microcomputer systems
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

RFQ
BOM