TIBPAL16R6-7CFN
Or copy the link below:
- Mfr.Part #
- TIBPAL16R6-7CFN
- Manufacturer
- Texas Instruments
- Package / Case
- 20-LCC (J-Lead)
- Datasheet
- Download
- Description
- IC PLD 7NS 20PLCC
- Stock
- 22,888
- In Stock ：
- 22,888
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- PLDs (Programmable Logic Device)
- Propagation Delay :
- 9 ns
- RoHS Status :
- Non-RoHS Compliant
- Reach Compliance Code :
- not_compliant
- Max Operating Temperature :
- 75°C
- Number of Product Terms :
- 64
- Base Part Number :
- TIBPAL16R6
- Temperature Grade :
- COMMERCIAL EXTENDED
- Number of Pins :
- 20
- Length :
- 8.9662mm
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Power Supplies :
- 5V
- JESD-609 Code :
- e0
- Height Seated (Max) :
- 4.57mm
- Package / Case :
- 20-LCC (J-Lead)
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Min Supply Voltage :
- 4.75V
- Number of Terminations :
- 20
- Terminal Pitch :
- 1.27mm
- Frequency :
- 100MHz
- Weight :
- 722.005655mg
- Terminal Position :
- QUAD
- Lead Free :
- Contains Lead
- Qualification Status :
- Not Qualified
- Terminal Finish :
- Tin/Lead (Sn/Pb)
- Additional Feature :
- POWER-UP RESET; REGISTER PRELOAD
- Min Operating Temperature :
- 0°C
- Organization :
- 8 DEDICATED INPUTS, 2 I/O
- Voltage - Input :
- 5V
- Pbfree Code :
- No
- Supply Voltage :
- 5V
- Programmable Type :
- PAL
- Max Supply Voltage :
- 5.25V
- Mount :
- Surface Mount
- Packaging :
- Tube
- HTS Code :
- 8542.39.00.01
- Number of Dedicated Inputs :
- 8
- Terminal Form :
- J BEND
- Series :
- IMPACT-X™ PAL®
- Mounting Type :
- Surface Mount
- Number of Outputs :
- 6
- Width :
- 8.9662mm
- Peak Reflow Temperature (Cel) :
- NOT SPECIFIED
- Pin Count :
- 20
- Output Function :
- MIXED
- Number of I/O :
- 2
- Datasheets
- TIBPAL16R6-7CFN
Surface Mount PAL IMPACT-X™ PAL® 20-LCC (J-Lead) Tube 5V TIBPAL16R6 20 Pins
TIBPAL16R6-7CFN Overview
PLD stock mounting is Type Surface Mount.It has the programmable type of PLD Programmable logic device PAL.IMPACT-X™ PAL® Series offers excellent value due to Programmable logic array's performance-cost ratio.Electronics industry users widely use the 20-LCC (J-Lead) because of Programmable logic array's low packaging cost.Programmable array logic's Packaging is made of Tube-materials.5V receives voltage as Programmable logic array's input.In the PLD stock, TIBPAL16R6 corresponds to the largest part.Surface Mount is the way in which the PLD is mounted.In the Complex Programmable logic device, 20 represents the pin number.Programmable logic devices are still possible to operate precisely at 100MHz frequency.In the current state, 75°C is the maximum working temperature.A 0°C warm environment is required while the machine is in Programmable logic device's operation.There is only a supply voltage of 4.75V volts that it can work with.There is no alternative to the 5.25V supply voltage for this PLD.Programmable 2 I/Os are included.Whenever the Complex Programmable logic device is powered, Programmable logic devices are powered from 5V.The 8 inputs are embedded into the PLD.Programming has included a 20 termination.There are 5V supplies in the Programmable logic device.In this case, 64 refers to the number of product terms available.The 6 outputs are numerous.A variety of 20 pins are present on the board, each serving a specific purpose.Additions like POWER-UP RESET; REGISTER PRELOAD are among them.
TIBPAL16R6-7CFN Features
Mounting type of Surface Mount
Input voltage of 5V
Maximum temperature of 75°C
2 I/Os
TIBPAL16R6-7CFN Applications
There are a lot of Texas Instruments
TIBPAL16R6-7CFN PLDs (Programmable Logic Device) applications.
- Power-limited applications
- High-speed Devices
- Electrically Devices
- Programmable Logic Devices
- High performance applications
- Low power applications
- Battery operated devices
- High-end communication equipment
- high-performance microcomputer systems
- Microcomputer systems
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
