S9S08QD4J1MSC
Or copy the link below:
- Mfr.Part #
- S9S08QD4J1MSC
- Manufacturer
- NXP Semiconductors
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC MCU 8BIT 4KB FLASH 8SOIC
- Stock
- 12,814
- In Stock ：
- 12,814
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- NXP Semiconductors
- Product Category :
- Microcontrollers
- Supply Voltage :
- 3V
- Supply Voltage-Max (Vsup) :
- 5.5V
- Speed :
- 16MHz
- Terminal Pitch :
- 1.27mm
- Bit Size :
- 8
- Power Supplies :
- 3/5V
- JESD-30 Code :
- R-PDSO-G8
- DAC Channels :
- No
- Qualification Status :
- Not Qualified
- RoHS Status :
- ROHS3 Compliant
- Screening Level :
- AEC-Q100
- Height Seated (Max) :
- 1.75mm
- uPs/uCs/Peripheral ICs Type :
- MICROCONTROLLER
- Series :
- S08
- RAM Size :
- 256 x 8
- Core Size :
- 8-Bit
- Factory Lead Time :
- 16 Weeks
- Peak Reflow Temperature (Cel) :
- 260
- Number of Terminations :
- 8
- Time@Peak Reflow Temperature-Max (s) :
- 40
- DMA Channels :
- No
- Program Memory Size :
- 4KB 4K x 8
- Voltage - Supply (Vcc/Vdd) :
- 2.7V~5.5V
- JESD-609 Code :
- e3
- Has ADC :
- yes
- Mounting Type :
- Surface Mount
- Moisture Sensitivity Level (MSL) :
- 3 (168 Hours)
- Width :
- 3.9mm
- Oscillator Type :
- Internal
- Published :
- 2004
- Operating Temperature :
- -40°C~125°C TA
- Packaging :
- Tube
- Peripherals :
- LVD, POR, PWM, WDT
- ECCN Code :
- EAR99
- Clock Frequency :
- 5MHz
- PWM Channels :
- yes
- Terminal Form :
- Gull wing
- Terminal Finish :
- MATTE TIN
- Base Part Number :
- S9S08QD4
- Data Converter :
- A/D 4x10b
- Supply Voltage-Min (Vsup) :
- 2.7V
- Program Memory Type :
- Flash
- Terminal Position :
- Dual
- Surface Mount :
- yes
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Number of I/O :
- 4
- Datasheets
- S9S08QD4J1MSC
4KB 4K x 8 FLASH 8-Bit Microcontroller S08 Series S9S08QD4 3V 8-SOIC (0.154, 3.90mm Width)
S9S08QD4J1MSC Description
The low-cost, high-performance HCS08 series of 8-bit microcontroller chips includes the S9S08QD4J1MSC MCU (MCUs). The upgraded HCS08 core is used by all MCUs in the series, which also comes in a range of module options, memory sizes, memory kinds, and package options.
S9S08QD4J1MSC Features
Peripherals
-
ADC — 4-channel, 10-bit analog-to-digital converter with automatic compare function, asynchronous clock source, temperature sensor and internal bandgap reference channel. ADC is hardware triggerable using the RTI counter.
-
TIM1 — 2-channel timer/pulse-width modulator; each channel can be used for input capture, output compare, buffered
edge-aligned PWM, or buffered center-aligned PWM
-
TIM2 — 1-channel timer/pulse-width modulator; each channel can be used for input capture, output compare, buffered edge-aligned PWM, or buffered center-aligned PWM
-
KBI — 4-pin keyboard interrupt module with software selectable polarity on edge or edge/level modes
Input/Output
-
Four General-purpose input/output (I/O) pins, one input-only pin and one output-only pin. Outputs 10 mA each, 60 mA maximum for package.
-
Software selectable pullups on ports when used as input
-
Software selectable slew rate control and drive strength on ports when used as output
-
Internal pullup on RESET and IRQ pin to reduce customer system cost
8-Bit HCS08 Central Processor Unit (CPU)
-
16 MHz HCS08 CPU (central processor unit)
-
HC08 instruction set with added BGND instruction
-
Background debugging system
-
Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module)
-
Support for up to 32 interrupt/reset sources
Memory
-
Flash read/program/erase over full operating voltage and temperature
-
Flash size: 4096 bytes
-
RAM size: 256 bytes
Power-Saving Modes
-
Wait plus three stops
Clock Source Options
-
ICS — Internal clock source module (ICS) containing a frequency-locked-loop (FLL) controlled by internal. Precision trimming of internal reference allows 0.2% resolution and 2% deviation over temperature and voltage.
System Protection
-
Watchdog computer operating properly (COP) reset with option to run from dedicated 32 kHz internal clock source or
bus clock
-
Low-voltage detection with reset or interrupt
-
Illegal opcode detection with reset
-
Illegal address detection with reset
-
Flash block protect
S9S08QD4J1MSC Applications
-
Automotive
-
Light sensing & controlling devices
-
Temperature sensing and controlling devices
-
Fire detection & safety devices
-
Industrial instrumentation devices
-
Process control devices
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
