IRL3715ZPBF
Or copy the link below:
- Mfr.Part #
- IRL3715ZPBF
- Manufacturer
- International Rectifier
- Package / Case
- TO-220-3
- Datasheet
- Download
- Description
- MOSFET N-CH 20V 50A TO220AB
- Stock
- 11,802
- In Stock ：
- 11,802
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- International Rectifier
- Product Category :
- Transistors - FETs, MOSFETs - Single
- Turn-Off Delay Time :
- 11 ns
- Recovery Time :
- 14 ns
- Supplier Device Package :
- TO-220AB
- Input Capacitance :
- 870pF
- Number of Pins :
- 3
- Vgs (Max) :
- ±20V
- Width :
- 4.69mm
- Min Operating Temperature :
- -55°C
- Radiation Hardening :
- No
- Fall Time (Typ) :
- 4.6 ns
- Package / Case :
- TO-220-3
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- REACH SVHC :
- No SVHC
- Threshold Voltage :
- 2.1V
- Mount :
- Through Hole
- Length :
- 10.54mm
- Rise Time :
- 44ns
- Power Dissipation :
- 45W
- Published :
- 2004
- Turn On Delay Time :
- 7.1 ns
- Gate to Source Voltage (Vgs) :
- 20V
- Height :
- 8.77mm
- Input Capacitance (Ciss) (Max) @ Vds :
- 870pF @ 10V
- Current - Continuous Drain (Id) @ 25°C :
- 50A Tc
- Voltage - Rated DC :
- 20V
- Drive Voltage (Max Rds On,Min Rds On) :
- 4.5V 10V
- Gate Charge (Qg) (Max) @ Vgs :
- 11nC @ 4.5V
- Max Operating Temperature :
- 175°C
- Mounting Type :
- Through Hole
- Drain to Source Breakdown Voltage :
- 20V
- Drain to Source Voltage (Vdss) :
- 20V
- Current Rating :
- 50A
- Continuous Drain Current (ID) :
- 50A
- Resistance :
- 11mOhm
- Power Dissipation-Max :
- 45W Tc
- Drain to Source Resistance :
- 15.5MOhm
- Operating Temperature :
- -55°C~175°C TJ
- Vgs(th) (Max) @ Id :
- 2.55V @ 250µA
- Rds On (Max) @ Id, Vgs :
- 11mOhm @ 15A, 10V
- Lead Free :
- Lead Free
- Packaging :
- Tube
- RoHS Status :
- RoHS Compliant
- Series :
- HEXFET®
- FET Type :
- N-Channel
- Rds On Max :
- 11 mΩ
- Datasheets
- IRL3715ZPBF
N-Channel Tube 11mOhm @ 15A, 10V ±20V 870pF @ 10V 11nC @ 4.5V 20V TO-220-3
IRL3715ZPBF Overview
An op amp's input capacitance is defined as the capacitance between both of its input terminals with either input grounded, and 870pF @ 10V is its maximum input capacitance.The drain current is the maximum continuous current the device can conduct, and this device has 50A continuous drain current (ID).A drainage-to-source breakdown voltage corresponds to the voltage at which a specified value of ID flows, where VGS is 20V, and this device has a drainage-to-source breakdown voltage of 20VV.Input capacitance must be charged before drain current conduction can begin, so the turn-off delay time is 11 ns.This device has a drain-to-source resistance of 15.5mOhm when a gate-to-source voltage (VGS) is applied to bias it into the on state, and when this voltage is applied to bias it into the on state.Before drain current conduction begins, the device's input capacitance must be charged, so the delay time is 7.1 ns.An FET transistor's gate-source voltage, VGS, indicates how much voltage is applied across the transistor's gate-source terminal and it can range from 20V to 1.In this case, the threshold voltage of the transistor is 2.1V, which means that it will not activate any of its functions when its threshold voltage reaches 2.1V.For this transistor to work, a voltage 20V is required between drain and source (Vdss).Using drive voltage (4.5V 10V), this device contributes to a reduction in overall power consumption.
IRL3715ZPBF Features
a continuous drain current (ID) of 50A
a drain-to-source breakdown voltage of 20V voltage
the turn-off delay time is 11 ns
single MOSFETs transistor is 15.5mOhm
a threshold voltage of 2.1V
a 20V drain to source voltage (Vdss)
IRL3715ZPBF Applications
There are a lot of Infineon Technologies
IRL3715ZPBF applications of single MOSFETs transistors.
- AC-DC Power Supply
- Synchronous Rectification for ATX 1 Server I Telecom PSU
- Motor drives and Uninterruptible Power Supplies
- Micro Solar Inverter
- DC/DC converters
- Power Tools
- Motor Drives and Uninterruptible Power Supples
- Synchronous Rectification
- Battery Protection Circuit
- Telecom 1 Sever Power Supplies
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
