TLC27M4AID

Share

Or copy the link below:

Mfr.Part #
TLC27M4AID
Manufacturer
Texas Instruments
Package / Case
14-SOIC (0.154, 3.90mm Width)
Datasheet
Download
Description
IC OPAMP GP 4 CIRCUIT 14SOIC
Stock
21,016
In Stock :
21,016

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Texas Instruments
Product Category :
Instrumentation, OP Amps, Buffer Amps
Average Bias Current-Max (IIB) :
0.00006μA
Supply Voltage Limit-Max :
18V
Output Current per Channel :
30mA
Input Offset Voltage (Vos) :
5mV
Terminal Finish :
Nickel/Palladium/Gold (Ni/Pd/Au)
Micropower :
yes
Terminal Form :
Gull wing
Pin Count :
14
Voltage - Input Offset :
900μV
Package / Case :
14-SOIC (0.154, 3.90mm Width)
Low-Offset :
No
Radiation Hardening :
No
Base Part Number :
TLC27
Terminal Position :
Dual
Factory Lead Time :
6 Weeks
Nominal Supply Current :
1.2mA
Unity Gain BW-Nom :
525 kHz
Width :
3.91mm
Nominal Gain Bandwidth Product :
525 kHz
Architecture :
VOLTAGE-FEEDBACK
REACH SVHC :
No SVHC
Peak Reflow Temperature (Cel) :
260
Number of Terminations :
14
Terminal Pitch :
1.27mm
Max I/O Voltage :
5mV
Current - Input Bias :
0.7pA
Mounting Type :
Surface Mount
Amplifier Type :
GENERAL PURPOSE
Surface Mount :
yes
Low-Bias :
yes
Common Mode Rejection Ratio :
65 dB
Number of Channels :
4
Operating Temperature :
-40°C~85°C
Pbfree Code :
yes
Series :
LinCMOS™
Programmable Power :
No
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
ECCN Code :
EAR99
Bandwidth :
525 kHz
Packaging :
Tube
Slew Rate :
0.62V/μs
Voltage Gain :
104.61dB
Height :
1.75mm
Gain Bandwidth Product :
635kHz
Frequency Compensation :
yes
Operating Supply Current :
570μA
JESD-609 Code :
e4
Supply Voltage :
5V
Number of Functions :
4
Lead Free :
Lead Free
Length :
8.65mm
Thickness :
1.58mm
Power Supplies :
5/10V
Number of Pins :
14
Voltage - Supply, Single/Dual (±) :
4V~16V ±2V~8V
RoHS Status :
ROHS3 Compliant
Power Dissipation :
950mW
Lifecycle Status :
ACTIVE (Last Updated: 1 week ago)
Datasheets
TLC27M4AID
Introducing Instrumentation, OP Amps, Buffer Amps Texas Instruments TLC27M4AID from Chip IC,where excellence meets affordability. This product stands out with its Package / Case:14-SOIC (0.154, 3.90mm Width), Base Part Number:TLC27, Number of Terminations:14, Mounting Type:Surface Mount, Number of Channels:4, Operating Temperature:-40°C~85°C, Bandwidth:525 kHz, Number of Pins:14, TLC27M4AID pinout, TLC27M4AID datasheet PDF, TLC27M4AID amp .Beyond Instrumentation, OP Amps, Buffer Amps Texas Instruments TLC27M4AID ,we also offer OP07CDR, TS321CX5 RFG, NE5532ADR, Our vast inventory has you covered. Contact us now for immediate solutions.

Texas Instruments TLC27M4AID


4 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 4V~16V ±2V~8V TLC27 14 Pins 14-SOIC (0.154, 3.90mm Width)

TLC27M4AID Overview


In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 14 pins on it. Op amp rates 5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 570μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 104.61dB for the time being. On the buffer amps, there are 4 channels that can be used. In this case, LinCMOS™ represents the instrumentation amplifiers' series number.

TLC27M4AID Features


14 Pins
supply voltage of 5V
104.61dB voltage gain


TLC27M4AID Applications


There are a lot of Texas Instruments
TLC27M4AID Instrumentational OP Amps applications.


  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection
  • Signal amplification
  • Signal filtering
  • Signal operation
  • Video computer boards
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • ROHM Semiconductor
    IC CMOS 2 CIRCUIT 8SOP
  • Diodes Incorporated
    IC OPAMP GP 1 CIRCUIT SOT25
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
  • Texas Instruments
    IC OPAMP GP 4 CIRCUIT 14SOIC
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
RFQ
BOM