TLC2201AIDG4
- Mfr.Part #
- TLC2201AIDG4
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 1
- In Stock :
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Lead Free :
- Lead Free
- RoHS Status :
- ROHS3 Compliant
- Base Part Number :
- TLC2201
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Architecture :
- VOLTAGE-FEEDBACK
- Width :
- 3.91mm
- Output Current :
- 50mA
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Slew Rate :
- 2.7V/μs
- Mounting Type :
- Surface Mount
- Supply Voltage Limit-Max :
- 8V
- Pin Count :
- 8
- Operating Temperature :
- -40°C~85°C
- Number of Terminations :
- 8
- Thickness :
- 1.58mm
- Nominal Gain Bandwidth Product :
- 1.9MHz
- Voltage Gain :
- 109.97dB
- Voltage - Supply, Single/Dual (±) :
- 4.6V~16V ±2.3V~8V
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Micropower :
- No
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Number of Functions :
- 1
- REACH SVHC :
- No SVHC
- Operating Supply Voltage :
- 8V
- Pbfree Code :
- yes
- ECCN Code :
- EAR99
- Operating Supply Current :
- 1.1mA
- JESD-609 Code :
- e4
- Length :
- 4.9mm
- Number of Pins :
- 8
- Terminal Position :
- Dual
- Input Offset Voltage (Vos) :
- 200μV
- Series :
- LinCMOS™
- Nominal Supply Current :
- 1.5mA
- Surface Mount :
- yes
- Peak Reflow Temperature (Cel) :
- 260
- Bandwidth :
- 1.8MHz
- Output Current per Channel :
- 50mA
- Packaging :
- Tube
- Radiation Hardening :
- No
- Height :
- 1.75mm
- Terminal Form :
- Gull wing
- Amplifier Type :
- GENERAL PURPOSE
- Low-Bias :
- yes
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- Common Mode Rejection Ratio :
- 90 dB
- Frequency Compensation :
- yes
- Low-Offset :
- yes
- Current - Input Bias :
- 1pA
- Number of Channels :
- 1
- Supply Voltage :
- 5V
- Dual Supply Voltage :
- 5V
- Max I/O Voltage :
- 200μV
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Output Type :
- Rail-to-Rail
- Voltage - Input Offset :
- 80μV
- Power Dissipation :
- 725mW
- Unity Gain BW-Nom :
- 1900 kHz
- Programmable Power :
- No
- Factory Lead Time :
- 6 Weeks
- Datasheets
- TLC2201AIDG4

1 Channels 50mA per Channel 1pA 90 dB Instrumentational OP Amps 8V 4.6V~16V ±2.3V~8V TLC2201 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLC2201AIDG4 Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 200μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 1.1mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 109.97dB. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V. Buffer op amp series numbers are indicated by the LinCMOS™.
TLC2201AIDG4 Features
8 Pins
supply voltage of 5V
109.97dB voltage gain
Output Type: Rail-to-Rail
TLC2201AIDG4 Applications
There are a lot of Texas Instruments
TLC2201AIDG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















