TLC2652Q-8D
- Mfr.Part #
- TLC2652Q-8D
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP ZERO-DRIFT 1 CIRC 8SOIC
- Stock
- 4,451
- In Stock :
- 4,451
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Low-Offset :
- yes
- Amplifier Type :
- Zero-Drift
- Voltage Gain :
- 150dB
- Mounting Type :
- Surface Mount
- Current - Input Bias :
- 4pA
- Nominal Gain Bandwidth Product :
- 1.9MHz
- Nominal Supply Current :
- 2.4mA
- Architecture :
- CHOPPER-STAB
- Thickness :
- 1.58mm
- Radiation Hardening :
- No
- Low-Bias :
- yes
- Packaging :
- Tube
- Voltage - Input Offset :
- 0.6μV
- Frequency Compensation :
- yes
- Lifecycle Status :
- ACTIVE (Last Updated: 1 week ago)
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Power Dissipation :
- 725mW
- Lead Free :
- Lead Free
- Number of Functions :
- 1
- Operating Supply Voltage :
- 8V
- Common Mode Rejection Ratio :
- 120 dB
- Supply Voltage Limit-Max :
- 8V
- Input Offset Voltage (Vos) :
- 3.5μV
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Series :
- LinCMOS™
- Pin Count :
- 8
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Pbfree Code :
- yes
- Programmable Power :
- No
- Slew Rate :
- 3.1V/μs
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Bandwidth :
- 1.9MHz
- Operating Supply Current :
- 1.5mA
- Length :
- 4.9mm
- Terminal Position :
- Dual
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Terminal Form :
- Gull wing
- Number of Pins :
- 8
- RoHS Status :
- ROHS3 Compliant
- Number of Terminations :
- 8
- Supply Voltage :
- 5V
- Output Current per Channel :
- 50mA
- Base Part Number :
- TLC2652
- Factory Lead Time :
- 6 Weeks
- Voltage - Supply, Single/Dual (±) :
- 3.8V~16V ±1.9V~8V
- Power Supplies :
- +-5V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Unity Gain BW-Nom :
- 1900 kHz
- Number of Elements :
- 2
- Packing Method :
- TR
- Height :
- 1.75mm
- ECCN Code :
- EAR99
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Number of Circuits :
- 1
- Surface Mount :
- yes
- Peak Reflow Temperature (Cel) :
- 260
- Micropower :
- No
- JESD-609 Code :
- e4
- Max I/O Voltage :
- 3.5μV
- Operating Temperature :
- -40°C~125°C
- Width :
- 3.91mm
- Datasheets
- TLC2652Q-8D

50mA per Channel 4pA 120 dB Instrumentational OP Amps 0.00006μA 8V 3.8V~16V ±1.9V~8V TLC2652 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLC2652Q-8D Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the Zero-Drift type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 3.5μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 1.5mA, this op amp ic can operate. 150dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 8V. For packing the buffer amplifier, the TR-axis is adopted. As the name implies, LinCMOS™ refers to the series of the buffer op amp.
TLC2652Q-8D Features
8 Pins
supply voltage of 5V
150dB voltage gain
TLC2652Q-8D Applications
There are a lot of Texas Instruments
TLC2652Q-8D Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















