TLC2274QDRG4Q1
- Mfr.Part #
- TLC2274QDRG4Q1
- Manufacturer
- Texas Instruments
- Package / Case
- 14-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14SOIC
- Stock
- 86
- In Stock :
- 86
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Pins :
- 14
- RoHS Status :
- ROHS3 Compliant
- Lead Free :
- Lead Free
- Architecture :
- VOLTAGE-FEEDBACK
- Operating Supply Voltage :
- 8V
- Output Current :
- 50mA
- Pbfree Code :
- yes
- Amplifier Type :
- GENERAL PURPOSE
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Thickness :
- 1.58mm
- Voltage Gain :
- 104.86dB
- Base Part Number :
- TLC2274
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Nominal Gain Bandwidth Product :
- 2.18MHz
- Length :
- 8.65mm
- Output Current per Channel :
- 50mA
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Micropower :
- No
- Number of Elements :
- 4
- Number of Functions :
- 4
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Supply Voltage Limit-Max :
- 8V
- Max I/O Voltage :
- 2.5mV
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Voltage - Input Offset :
- 300µV
- Low-Offset :
- No
- Mounting Type :
- Surface Mount
- Gain Bandwidth Product :
- 2.25MHz
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Series :
- Automotive, AEC-Q100, LinCMOS™
- Pin Count :
- 14
- Package / Case :
- 14-SOIC (0.154, 3.90mm Width)
- Nominal Supply Current :
- 6mA
- Number of Terminations :
- 14
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Peak Reflow Temperature (Cel) :
- 260
- Programmable Power :
- No
- Terminal Form :
- Gull wing
- Frequency Compensation :
- yes
- Packing Method :
- TR
- Output Type :
- Rail-to-Rail
- Height :
- 1.75mm
- JESD-609 Code :
- e4
- Unity Gain BW-Nom :
- 2180 kHz
- ECCN Code :
- EAR99
- Factory Lead Time :
- 12 Weeks
- Packaging :
- Tape and Reel (TR)
- Width :
- 3.91mm
- Operating Supply Current :
- 4.8mA
- Bandwidth :
- 2.18MHz
- Operating Temperature :
- -40°C~125°C
- Input Offset Voltage (Vos) :
- 2.5mV
- Terminal Position :
- Dual
- Voltage - Supply, Single/Dual (±) :
- 4.4V~16V ±2.2V~8V
- Surface Mount :
- yes
- Slew Rate :
- 3.6V/μs
- Low-Bias :
- yes
- Terminal Pitch :
- 1.27mm
- Radiation Hardening :
- No
- Current - Input Bias :
- 1pA
- Common Mode Rejection Ratio :
- 70 dB
- Power Dissipation :
- 950mW
- Supply Voltage :
- 5V
- Datasheets
- TLC2274QDRG4Q1

50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00006μA 8V 4.4V~16V ±2.2V~8V TLC2274 14 Pins 14-SOIC (0.154, 3.90mm Width)
TLC2274QDRG4Q1 Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 14 terminations in the next few months. There are a total of 14 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 14 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 2.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 4.8mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. There are a total of 4 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 8V. The instrumentation amplifier is packed in the form of TR. The Automotive, AEC-Q100, LinCMOS™ indicates the series number of the op amp.
TLC2274QDRG4Q1 Features
14 Pins
supply voltage of 5V
104.86dB voltage gain
Output Type: Rail-to-Rail
TLC2274QDRG4Q1 Applications
There are a lot of Texas Instruments
TLC2274QDRG4Q1 Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















