TLC2264CPWR

Share

Or copy the link below:

Mfr.Part #
TLC2264CPWR
Manufacturer
Texas Instruments
Package / Case
14-TSSOP (0.173, 4.40mm Width)
Datasheet
Download
Description
IC OPAMP GP 4 CIRCUIT 14TSSOP
Stock
6,988
In Stock :
6,988

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Texas Instruments
Product Category :
Instrumentation, OP Amps, Buffer Amps
Voltage Gain :
114.81dB
Micropower :
yes
Supply Voltage :
5V
Length :
5mm
Input Offset Voltage (Vos) :
2.5mV
Average Bias Current-Max (IIB) :
0.0001μA
Low-Offset :
No
Width :
4.4mm
Radiation Hardening :
No
Operating Supply Voltage :
8V
Number of Functions :
4
Amplifier Type :
GENERAL PURPOSE
Lifecycle Status :
ACTIVE (Last Updated: 3 days ago)
Number of Channels :
4
Package / Case :
14-TSSOP (0.173, 4.40mm Width)
Input Offset Current-Max (IIO) :
0.0001μA
Terminal Form :
Gull wing
Frequency Compensation :
yes
Nominal Supply Current :
1mA
Slew Rate :
0.55V/µs
Pin Count :
14
Operating Supply Current :
850μA
Height :
1.2mm
Programmable Power :
No
REACH SVHC :
No SVHC
Output Current per Channel :
50mA
Max I/O Voltage :
2.5mV
Max Power Dissipation :
700mW
Common Mode Rejection Ratio :
70 dB
Output Current :
50mA
Unity Gain BW-Nom :
710 kHz
Supply Voltage Limit-Max :
8V
Base Part Number :
TLC2264
Lead Free :
Lead Free
Series :
LinCMOS™
JESD-609 Code :
e4
Voltage - Supply, Single/Dual (±) :
4.4V~16V ±2.2V~8V
Low-Bias :
yes
Packing Method :
TR
Bandwidth :
710 kHz
Gain Bandwidth Product :
730kHz
Number of Terminations :
14
Operating Temperature :
0°C~70°C
RoHS Status :
ROHS3 Compliant
Factory Lead Time :
6 Weeks
Terminal Position :
Dual
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
Architecture :
VOLTAGE-FEEDBACK
Contact Plating :
Gold
Surface Mount :
yes
Voltage - Input Offset :
300µV
Current - Input Bias :
1pA
Nominal Gain Bandwidth Product :
710 kHz
Pbfree Code :
yes
Neg Supply Voltage-Nom (Vsup) :
-5V
Mounting Type :
Surface Mount
Thickness :
1mm
Number of Pins :
14
Output Type :
Rail-to-Rail
Peak Reflow Temperature (Cel) :
260
ECCN Code :
EAR99
Packaging :
Cut Tape (CT)
Power Dissipation :
700mW
Introducing Instrumentation, OP Amps, Buffer Amps Texas Instruments TLC2264CPWR from Chip IC,where excellence meets affordability. This product stands out with its Number of Channels:4, Package / Case:14-TSSOP (0.173, 4.40mm Width), Base Part Number:TLC2264, Bandwidth:710 kHz, Number of Terminations:14, Operating Temperature:0°C~70°C, Mounting Type:Surface Mount, Number of Pins:14, TLC2264CPWR pinout, TLC2264CPWR datasheet PDF, TLC2264CPWR amp .Beyond Instrumentation, OP Amps, Buffer Amps Texas Instruments TLC2264CPWR ,we also offer OP07CDR, TS321CX5 RFG, NE5532ADR, Our vast inventory has you covered. Contact us now for immediate solutions.

Texas Instruments TLC2264CPWR


4 Channels 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0001μA 8V 4.4V~16V ±2.2V~8V TLC2264 14 Pins 14-TSSOP (0.173, 4.40mm Width)

TLC2264CPWR Overview


In the package, you will find a 14-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Cut Tape (CT) case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 14 pins on it. Op amp rates 2.5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using an 850μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 114.81dB for the time being. On the buffer amps, there are 4 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 8V. The linear amplifier is packaged by using a TR axis. In this case, LinCMOS™ represents the instrumentation amplifiers' series number.

TLC2264CPWR Features


14 Pins
supply voltage of 5V
114.81dB voltage gain
Output Type: Rail-to-Rail


TLC2264CPWR Applications


There are a lot of Texas Instruments
TLC2264CPWR Instrumentational OP Amps applications.


  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection
  • Signal amplification
  • Signal filtering
  • Signal operation
  • Video computer boards
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • ROHM Semiconductor
    IC CMOS 2 CIRCUIT 8SOP
  • Diodes Incorporated
    IC OPAMP GP 1 CIRCUIT SOT25
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
  • Texas Instruments
    IC OPAMP GP 4 CIRCUIT 14SOIC
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
RFQ
BOM