TLC2262CPW
- Mfr.Part #
- TLC2262CPW
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8TSSOP
- Stock
- 101,719
- In Stock :
- 101,719
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Supply Voltage :
- 5V
- Bandwidth :
- 820 kHz
- JESD-609 Code :
- e4
- Micropower :
- yes
- Voltage Gain :
- 114.81dB
- Number of Functions :
- 2
- Output Current :
- 50mA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Nominal Supply Current :
- 500μA
- ECCN Code :
- EAR99
- Operating Temperature :
- 0°C~70°C
- Pbfree Code :
- yes
- Lead Free :
- Lead Free
- Programmable Power :
- No
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Packaging :
- Tube
- Current - Input Bias :
- 1pA
- Package / Case :
- 8-TSSOP (0.173, 4.40mm Width)
- Supply Voltage Limit-Max :
- 8V
- Surface Mount :
- yes
- Common Mode Rejection Ratio :
- 70 dB
- Max I/O Voltage :
- 2.5mV
- Power Dissipation :
- 525mW
- Number of Channels :
- 2
- Pin Count :
- 8
- Peak Reflow Temperature (Cel) :
- 260
- Output Type :
- Rail-to-Rail
- Width :
- 4.4mm
- Amplifier Type :
- GENERAL PURPOSE
- Operating Supply Current :
- 425µA
- Number of Pins :
- 8
- Architecture :
- VOLTAGE-FEEDBACK
- Operating Supply Voltage :
- 8V
- Thickness :
- 1mm
- Input Offset Voltage (Vos) :
- 2.5mV
- RoHS Status :
- ROHS3 Compliant
- Terminal Form :
- Gull wing
- Output Current per Channel :
- 50mA
- Slew Rate :
- 0.55V/µs
- Number of Terminations :
- 8
- Factory Lead Time :
- 6 Weeks
- Lifecycle Status :
- ACTIVE (Last Updated: 1 week ago)
- Height :
- 1.2mm
- Base Part Number :
- TLC2262
- Radiation Hardening :
- No
- Gain Bandwidth Product :
- 730kHz
- Voltage - Input Offset :
- 300µV
- Low-Offset :
- No
- Length :
- 3mm
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Mounting Type :
- Surface Mount
- Series :
- LinCMOS™
- Input Offset Current-Max (IIO) :
- 0.0001μA
- Frequency Compensation :
- yes
- Terminal Pitch :
- 0.65mm
- REACH SVHC :
- No SVHC
- Voltage - Supply, Single/Dual (±) :
- 4.4V~16V ±2.2V~8V
- Low-Bias :
- yes
- Terminal Position :
- Dual
- Unity Gain BW-Nom :
- 710 kHz
- Average Bias Current-Max (IIB) :
- 0.0001μA
- Nominal Gain Bandwidth Product :
- 710 kHz
- Datasheets
- TLC2262CPW

2 Channels 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0001μA 8V 4.4V~16V ±2.2V~8V TLC2262 8 Pins 8-TSSOP (0.173, 4.40mm Width)
TLC2262CPW Overview
In order to protect the op amps, a 8-TSSOP (0.173, 4.40mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 2.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 425μA and 10 . Maintain 114.81dB as the voltage gain. Buffer op amp is equipped with 2 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 8V. LinCMOS™ is the number that corresponds to the series of the buffer op amp.
TLC2262CPW Features
8 Pins
supply voltage of 5V
114.81dB voltage gain
Output Type: Rail-to-Rail
TLC2262CPW Applications
There are a lot of Texas Instruments
TLC2262CPW Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















