TLC2252ID
- Mfr.Part #
- TLC2252ID
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 22,187
- In Stock :
- 22,187
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Nominal Gain Bandwidth Product :
- 200 kHz
- Architecture :
- VOLTAGE-FEEDBACK
- Peak Reflow Temperature (Cel) :
- 260
- Input Offset Current-Max (IIO) :
- 0.00006μA
- REACH SVHC :
- No SVHC
- Number of Functions :
- 2
- Unity Gain BW-Nom :
- 200 kHz
- Gain Bandwidth Product :
- 210kHz
- Dual Supply Voltage :
- 5V
- Power Dissipation :
- 724mW
- Output Current :
- 50mA
- Voltage - Supply, Single/Dual (±) :
- 4.4V~16V ±2.2V~8V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Factory Lead Time :
- 6 Weeks
- Lead Free :
- Lead Free
- Nominal Supply Current :
- 125μA
- Micropower :
- yes
- Surface Mount :
- yes
- Current - Input Bias :
- 1pA
- Average Bias Current-Max (IIB) :
- 0.001μA
- Supply Voltage Limit-Max :
- 8V
- Number of Pins :
- 8
- Operating Supply Voltage :
- 8V
- Series :
- LinCMOS™
- Voltage - Input Offset :
- 200μV
- Radiation Hardening :
- No
- Low-Offset :
- No
- Terminal Position :
- Dual
- Operating Temperature :
- -40°C~125°C
- Operating Supply Current :
- 80μA
- Number of Channels :
- 2
- Pin Count :
- 8
- Programmable Power :
- No
- Pbfree Code :
- yes
- Amplifier Type :
- GENERAL PURPOSE
- Bandwidth :
- 200 kHz
- Output Current per Channel :
- 50mA
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Width :
- 3.91mm
- Mounting Type :
- Surface Mount
- Packaging :
- Tube
- Voltage Gain :
- 124.61dB
- Max I/O Voltage :
- 1.5mV
- Supply Voltage :
- 5V
- Base Part Number :
- TLC2252
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Frequency Compensation :
- yes
- RoHS Status :
- ROHS3 Compliant
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- ECCN Code :
- EAR99
- Height :
- 1.75mm
- JESD-609 Code :
- e4
- Output Type :
- Rail-to-Rail
- Input Offset Voltage (Vos) :
- 1.5mV
- Number of Terminations :
- 8
- Common Mode Rejection Ratio :
- 70 dB
- Thickness :
- 1.58mm
- Slew Rate :
- 0.12V/µs
- Terminal Form :
- Gull wing
- Low-Bias :
- yes
- Length :
- 4.9mm
- Datasheets
- TLC2252ID

2 Channels 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.001μA 8V 4.4V~16V ±2.2V~8V TLC2252 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLC2252ID Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 1.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 80μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 124.61dB. There are a total of 2 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V. Buffer op amp series numbers are indicated by the LinCMOS™.
TLC2252ID Features
8 Pins
supply voltage of 5V
124.61dB voltage gain
Output Type: Rail-to-Rail
TLC2252ID Applications
There are a lot of Texas Instruments
TLC2252ID Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















