TLC2252CDR
- Mfr.Part #
- TLC2252CDR
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 3,518
- In Stock :
- 3,518
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Peak Reflow Temperature (Cel) :
- 260
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Slew Rate :
- 0.12V/µs
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Mounting Type :
- Surface Mount
- Architecture :
- VOLTAGE-FEEDBACK
- Low-Bias :
- yes
- Nominal Gain Bandwidth Product :
- 200 kHz
- Operating Supply Current :
- 80μA
- Frequency Compensation :
- yes
- Low-Offset :
- No
- Output Current :
- 50mA
- Width :
- 3.91mm
- Base Part Number :
- TLC2252
- Supply Voltage Limit-Max :
- 8V
- Surface Mount :
- yes
- Input Offset Voltage (Vos) :
- 1.5mV
- Lead Free :
- Lead Free
- Operating Temperature :
- 0°C~70°C
- Voltage - Input Offset :
- 200μV
- Current - Input Bias :
- 1pA
- Bandwidth :
- 200 kHz
- RoHS Status :
- ROHS3 Compliant
- Power Dissipation :
- 724mW
- Gain Bandwidth Product :
- 210kHz
- Number of Elements :
- 2
- Average Bias Current-Max (IIB) :
- 0.0001μA
- Output Current per Channel :
- 50mA
- Thickness :
- 1.58mm
- ECCN Code :
- EAR99
- Voltage - Supply, Single/Dual (±) :
- 4.4V~16V ±2.2V~8V
- Length :
- 4.9mm
- Common Mode Rejection Ratio :
- 70 dB
- JESD-609 Code :
- e4
- Factory Lead Time :
- 6 Weeks
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Unity Gain BW-Nom :
- 200 kHz
- Programmable Power :
- No
- Amplifier Type :
- GENERAL PURPOSE
- Number of Functions :
- 2
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Number of Pins :
- 8
- Terminal Form :
- Gull wing
- Voltage Gain :
- 124.61dB
- Micropower :
- yes
- Pbfree Code :
- yes
- Supply Voltage :
- 5V
- Packaging :
- Tape and Reel (TR)
- Nominal Supply Current :
- 125μA
- Number of Terminations :
- 8
- Height :
- 1.75mm
- Max I/O Voltage :
- 1.5mV
- Output Type :
- Rail-to-Rail
- Terminal Position :
- Dual
- Radiation Hardening :
- No
- Operating Supply Voltage :
- 8V
- Packing Method :
- TR
- Series :
- LinCMOS™
- Lifecycle Status :
- ACTIVE (Last Updated: 1 day ago)
- Pin Count :
- 8
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Datasheets
- TLC2252CDR

50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0001μA 8V 4.4V~16V ±2.2V~8V TLC2252 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLC2252CDR Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. The pins on this board total to 8 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 1.5mV. This electronic part is best mounted with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureUsing an 80μA supply current, this operational amplifier ics can be operated. Maintain 124.61dB as the voltage gain. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8V. It is used TR to pack the op amps. Buffer op amp series numbers are indicated by the LinCMOS?.
TLC2252CDR Features
8 Pins
supply voltage of 5V
124.61dB voltage gain
Output Type: Rail-to-Rail
TLC2252CDR Applications
There are a lot of Texas Instruments TLC2252CDR Instrumentational OP Amps applications.
-
Voltage regulation circuit
-
Weak signal detection
-
Image computer boards
-
Multimedia playback equipment
-
Information processing
-
Comparator
-
ECG equipment
-
Logarithmic operation circuits
-
Video conversion and routing
-
earphone
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















