TLC2252CDG4
- Mfr.Part #
- TLC2252CDG4
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 1,956
- In Stock :
- 1,956
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Voltage Gain :
- 124.61dB
- JESD-609 Code :
- e4
- Pin Count :
- 8
- Power Dissipation :
- 724mW
- Micropower :
- yes
- REACH SVHC :
- No SVHC
- Output Current :
- 50mA
- Unity Gain BW-Nom :
- 200 kHz
- Terminal Position :
- Dual
- Supply Voltage Limit-Max :
- 8V
- Current - Input Bias :
- 1pA
- Nominal Supply Current :
- 125μA
- Gain Bandwidth Product :
- 210kHz
- Series :
- LinCMOS™
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Height :
- 1.75mm
- Base Part Number :
- TLC2252
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Number of Channels :
- 2
- Low-Bias :
- yes
- Operating Supply Current :
- 80μA
- Number of Functions :
- 2
- Amplifier Type :
- GENERAL PURPOSE
- Radiation Hardening :
- No
- Number of Pins :
- 8
- Terminal Form :
- Gull wing
- Width :
- 3.91mm
- Factory Lead Time :
- 6 Weeks
- Voltage - Supply, Single/Dual (±) :
- 4.4V~16V ±2.2V~8V
- Thickness :
- 1.58mm
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Packaging :
- Tube
- Output Type :
- Rail-to-Rail
- Voltage - Input Offset :
- 200μV
- Nominal Gain Bandwidth Product :
- 200 kHz
- Frequency Compensation :
- yes
- Input Offset Voltage (Vos) :
- 1.5mV
- Mounting Type :
- Surface Mount
- Surface Mount :
- yes
- Pbfree Code :
- yes
- Common Mode Rejection Ratio :
- 70 dB
- Average Bias Current-Max (IIB) :
- 0.0001μA
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Bandwidth :
- 200 kHz
- Programmable Power :
- No
- Lead Free :
- Lead Free
- RoHS Status :
- ROHS3 Compliant
- Output Current per Channel :
- 50mA
- Length :
- 4.9mm
- Dual Supply Voltage :
- 5V
- Max I/O Voltage :
- 1.5mV
- Operating Temperature :
- 0°C~70°C
- Architecture :
- VOLTAGE-FEEDBACK
- ECCN Code :
- EAR99
- Peak Reflow Temperature (Cel) :
- 260
- Slew Rate :
- 0.12V/µs
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Operating Supply Voltage :
- 8V
- Number of Terminations :
- 8
- Low-Offset :
- No
- Supply Voltage :
- 5V
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Datasheets
- TLC2252CDG4

2 Channels 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0001μA 8V 4.4V~16V ±2.2V~8V TLC2252 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLC2252CDG4 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 1.5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using an 80μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 124.61dB for the time being. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 8V. In this case, LinCMOS™ represents the instrumentation amplifiers' series number.
TLC2252CDG4 Features
8 Pins
supply voltage of 5V
124.61dB voltage gain
Output Type: Rail-to-Rail
TLC2252CDG4 Applications
There are a lot of Texas Instruments
TLC2252CDG4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















