TLC2252CD
Or copy the link below:
- Mfr.Part #
- TLC2252CD
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 8,644
- In Stock ：
- 8,644
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- RoHS Status :
- ROHS3 Compliant
- Pin Count :
- 8
- Supply Voltage Limit-Max :
- 8V
- Voltage - Supply, Single/Dual (±) :
- 4.4V~16V ±2.2V~8V
- Average Bias Current-Max (IIB) :
- 0.0001μA
- Output Type :
- Rail-to-Rail
- REACH SVHC :
- No SVHC
- Terminal Position :
- Dual
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Voltage Gain :
- 124.61dB
- Peak Reflow Temperature (Cel) :
- 260
- Width :
- 3.91mm
- Unity Gain BW-Nom :
- 200 kHz
- Amplifier Type :
- GENERAL PURPOSE
- JESD-609 Code :
- e4
- Nominal Gain Bandwidth Product :
- 200 kHz
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Common Mode Rejection Ratio :
- 70 dB
- Output Current per Channel :
- 50mA
- Low-Offset :
- No
- Nominal Supply Current :
- 125μA
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Frequency Compensation :
- yes
- Height :
- 1.75mm
- Slew Rate :
- 0.12V/µs
- Operating Supply Voltage :
- 8V
- Dual Supply Voltage :
- 5V
- Input Offset Voltage (Vos) :
- 1.5mV
- Lead Free :
- Lead Free
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Terminal Form :
- Gull wing
- Series :
- LinCMOS™
- ECCN Code :
- EAR99
- Operating Supply Current :
- 80μA
- Current - Input Bias :
- 1pA
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Surface Mount :
- yes
- Power Dissipation :
- 724mW
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Length :
- 4.9mm
- Contact Plating :
- Gold
- Supply Voltage :
- 5V
- Mounting Type :
- Surface Mount
- Max Supply Current :
- 125μA
- Number of Channels :
- 2
- Base Part Number :
- TLC2252
- Max Power Dissipation :
- 724mW
- Number of Pins :
- 8
- Pbfree Code :
- yes
- Low-Bias :
- yes
- Bandwidth :
- 200 kHz
- Packaging :
- Tube
- Micropower :
- yes
- Voltage - Input Offset :
- 200μV
- Gain Bandwidth Product :
- 210kHz
- Programmable Power :
- No
- Output Current :
- 50mA
- Max I/O Voltage :
- 1.5mV
- Thickness :
- 1.58mm
- Radiation Hardening :
- No
- Operating Temperature :
- 0°C~70°C
- Factory Lead Time :
- 6 Weeks
- Number of Terminations :
- 8
- Number of Functions :
- 2
- Architecture :
- VOLTAGE-FEEDBACK
- Datasheets
- TLC2252CD
2 Channels 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0001μA 8V 4.4V~16V ±2.2V~8V TLC2252 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLC2252CD Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 1.5mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . As long as the supply current of the chip does not exceed 80μA, this op amp ic can operate. 124.61dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V. As the name implies, LinCMOS™ refers to the series of the buffer op amp.
TLC2252CD Features
8 Pins
supply voltage of 5V
124.61dB voltage gain
Output Type: Rail-to-Rail
TLC2252CD Applications
There are a lot of Texas Instruments
TLC2252CD Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
