MCIMX7D3EVK10SC
- Mfr.Part #
- MCIMX7D3EVK10SC
- Manufacturer
- NXP Semiconductors
- Package / Case
- 488-TFBGA
- Datasheet
- Download
- Description
- NO EPDC, 2 ETH, NO CAN, 2 OTG 1
- Stock
- 46,838
- In Stock :
- 46,838
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- NXP Semiconductors
- Product Category :
- Microprocessors
- Terminal Pitch :
- 0.4mm
- Height Seated (Max) :
- 1.1mm
- Graphics Acceleration :
- No
- Packaging :
- Tray
- RAM Controllers :
- LPDDR2, LPDDR3, DDR3, DDR3L
- Co-Processors/DSP :
- Multimedia; NEON™ MPE
- Surface Mount :
- yes
- USB :
- USB 2.0 + PHY (1), USB 2.0 OTG + PHY (2)
- uPs/uCs/Peripheral ICs Type :
- MULTIFUNCTION PERIPHERAL
- Address Bus Width :
- 16
- External Data Bus Width :
- 32
- Additional Interfaces :
- AC'97, CAN, eCSPI, I2C, I2S, MMC/SD/SDIO, PCIe, QSPI, SAI, UART
- Published :
- 2012
- Number of Terminations :
- 488
- Boundary Scan :
- yes
- Display & Interface Controllers :
- Keypad, LCD, MIPI
- HTS Code :
- 8542.31.00.01
- Factory Lead Time :
- 17 Weeks
- Voltage - I/O :
- 1.8V 3.3V
- Core Processor :
- ARM® Cortex®-A7, ARM® Cortex®-M4
- Supply Voltage-Max (Vsup) :
- 1.25V
- Moisture Sensitivity Level (MSL) :
- 3 (168 Hours)
- Terminal Position :
- BOTTOM
- Package / Case :
- 488-TFBGA
- Operating Temperature :
- -20°C~105°C TJ
- Series :
- I.MX7D
- Supply Voltage :
- 1.1V
- Supply Voltage-Min (Vsup) :
- 1.045V
- Length :
- 12mm
- Ethernet :
- 10/100/1000Mbps (2)
- Security Features :
- A-HAB, ARM TZ, CAAM, CSU, SJC, SNVS
- JESD-30 Code :
- S-PBGA-B488
- Number of Cores/Bus Width :
- 2 Core 32-Bit
- Terminal Form :
- Ball
- RoHS Status :
- ROHS3 Compliant
- Speed :
- 1.0GHz
- Datasheets
- MCIMX7D3EVK10SC

0.4mm ARM® Cortex®-A7, ARM® Cortex®-M4 Microprocessor i.MX7D Series 1.1V 488-TFBGA
MCIMX7D3EVK10SC Description
The i.MX 7Dual family of processors represents NXP’s latest achievement in high-performance processing for low-power requirements with a high degree of functional integration. These processors are targeted toward the growing market of connected and portable devices.
MCIMX7D3EVK10SC Features
ARM Cortex-A7 plus ARM Cortex-M4—Heterogeneous Multicore Processing architecture enables the device to run an open operating system like Linux/Android on the Cortex-A7 core and an RTOS like FreeRTOS? on the Cortex-M4 core.
Two ARM Cortex-A7 cores—The processor enhances the capabilities of portable, connected applications by fulfilling the ever-increasing MIPS needs of operating systems and applications at the lowest power consumption levels per MHz.
Multilevel memory system—The multilevel Cortex-A7 memory system is based on the L1 instruction and data caches, L2 cache, and internal and external memory. The processor supports many types of external memory devices, including DDR3, DDR3L, LPDDR2 and LPDDR3, NOR Flash, NAND Flash (MLC and SLC), QSPI Flash, and managed NAND, including eMMC rev.
Power efficiency—Power management implemented throughout the IC enables features and peripherals to consume minimum power in both active and various low-power modes.
Multimedia—The multimedia performance is enhanced by a multilevel cache system, NEON? MPE (Media Processor Engine) coprocessor, a programmable smart DMA (SDMA) controller.
Up to two Gigabit Ethernet with AVB—10/100/1000 Mbps Ethernet controllers supporting IEEE Std 1588 time synchronization.
Electronic Paper Display Controller (EPDC)—The processor integrates an EPD controller that supports E Ink color and monochrome panels with up to 2048 x 1536 resolution at 106 Hz refresh, 4096 x 4096 resolution at 20 Hz refresh, and 5-bit grayscale (32-levels per color channel)
MCIMX7D3EVK10SC Applications
Audio
Connected devices
Access control panels
Human-machine interfaces (HMI)
Portable medical and health care
IP phones
Smart appliances
Point of Sale
eReaders
Wearables
Home energy management systems
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















