LT1802IS#PBF
- Mfr.Part #
- LT1802IS#PBF
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- SOIC-14
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14SO
- Stock
- 25,544
- In Stock :
- 25,544
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Terminal Position :
- Dual
- Package / Case :
- SOIC-14
- Base Product Number :
- LT1802
- Number of Channels :
- 4
- Max Dual Supply Voltage :
- 6.3 V
- Terminal Finish :
- Matte Tin (Sn)
- Nominal Gain Bandwidth Product :
- 80 MHz
- Voltage - Input Offset :
- 700 µV
- Seated Height-Max :
- 1.752 mm
- Common Mode Rejection Ratio :
- 85 dB
- Supply Voltage Limit-Max :
- 6.3 V
- Min Supply Voltage :
- 2.3 V
- Terminal Form :
- Gull wing
- Reach Compliance Code :
- Compliant
- Maximum Operating Temperature :
- + 85 C
- Minimum Operating Temperature :
- - 40 C
- Peak Reflow Temperature (Cel) :
- 260
- Length :
- 8.649 mm
- Operating Temperature :
- -40°C ~ 85°C
- Package :
- Tube
- Neg Supply Voltage-Nom (Vsup) :
- -5 V
- Number of Circuits :
- 4
- Manufacturer :
- Analog Devices Inc.
- Max Operating Temperature :
- 85 °C
- Product Status :
- Active
- Voltage Gain dB :
- -
- Pin Count :
- 14
- Temperature Grade :
- Industrial
- Slew Rate :
- 25 V/µs
- Schedule B :
- 8542330000
- Power Supply Rejection Ratio (PSRR) :
- 78 dB
- Surface Mount :
- yes
- Terminal Pitch :
- 1.27 mm
- Manufacturer Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Product Category :
- High Speed Operational Amplifiers
- Current - Output / Channel :
- 50 mA
- Number of Pins :
- 14
- Series :
- LT1802
- Amplifier Type :
- Low Power Precision Operational Amplifier
- Packaging :
- Tube
- Gain Bandwidth Product :
- 70 MHz
- Output Current per Channel :
- 50 mA
- Unity Gain BW-Nom :
- 65000 kHz
- Brand :
- Analog Devices
- Mounting Style :
- SMD/SMT
- Min Operating Temperature :
- -40 °C
- Width :
- 3.899 mm
- Operating Supply Current :
- 1.8 mA
- JESD-609 Code :
- e3
- Pbfree Code :
- No
- Input Type :
- Rail-to-Rail
- Number of Terminals :
- 14
- Voltage Gain :
- 98.59 dB
- Current - Supply :
- 1.6mA (x4 Channels)
- Technology :
- Bipolar
- Product :
- High Speed Amplifiers
- Mounting Type :
- Surface Mount
- JESD-30 Code :
- R-PDSO-G14
- Qualification Status :
- Not Qualified
- Package Shape :
- RECTANGULAR
- Output Type :
- Rail-to-Rail
- Product Type :
- Op Amps - High Speed Operational Amplifiers
- Brand Name :
- Analog Devices Inc
- Current - Input Bias :
- 25 nA
- Input Offset Voltage (Vos) :
- 350 µV
- Subcategory :
- Amplifier ICs
- Input Offset Voltage-Max :
- 5000 µV
- Number of Elements :
- 4
- Input Bias Current :
- 400 nA
- Average Bias Current-Max (IIB) :
- 2.25 µA
- Number of Functions :
- 4
- Height :
- 1.75 mm
- Max Supply Voltage :
- 12.6 V
- RoHS :
- Compliant
- Min Dual Supply Voltage :
- 1.15 V
- Supplier Device Package :
- 14-SO
- Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Shutdown :
- No Shutdown
- Datasheets
- LT1802IS#PBF

4 Channels 50 mA per Channel 25 nA 85 dB Instrumentational OP Amps 2.25 µA 14 Pins SOIC-14
LT1802IS#PBF Overview
It is packaged in an SOIC-14-case that protects the operational amplifiers from damage. An op amp of this type is a Low Power Precision Operational Amplifier-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. A total of 14 pins are attached to buffer op amp. A type of Amplifier ICs op amp ic can be identified by the fact that this is a type of Amplifier ICs device. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 350 µV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C ~ 85°C. A supply current of 1.8 mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 98.59 dB. This op amp ic has 4 circuits. There are a total of 4 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below -40 °C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85 °C. There are 4 elements in this buffer amplifier. For optimal performance, this electrical part should be connected to a supply with a current of 1.6mA (x4 Channels). It is important to keep in mind that the power supply voltage of this electric component is below 12.6 V, which is suitable. Keeping the linear amplifier's supply voltage above 2.3 V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 6.3 V volts. Buffer op amp series numbers are indicated by the LT1802. There are 14 wire terminals on this op amp ic.
LT1802IS#PBF Features
14 Pins
98.59 dB voltage gain
Output Type: Rail-to-Rail
14Terminations
LT1802IS#PBF Applications
There are a lot of Analog Devices
LT1802IS#PBF Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















