LT1800IS8#PBF
- Mfr.Part #
- LT1800IS8#PBF
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SO
- Stock
- 200
- In Stock :
- 200
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Series :
- -
- Technology :
- Bipolar
- Power Supply Rejection Ratio (PSRR) :
- 80 dB
- Current - Output / Channel :
- 50 mA
- JESD-609 Code :
- e3
- Qualification Status :
- Not Qualified
- Input Bias Current :
- 400 nA
- Max Supply Voltage :
- 12.6 V
- Min Dual Supply Voltage :
- 1.15 V
- Seated Height-Max :
- 1.75 mm
- Reach Compliance Code :
- Compliant
- Height :
- 1 mm
- Shutdown :
- No Shutdown
- Product :
- Operational Amplifiers
- Mounting Type :
- Surface Mount
- Current - Supply :
- 1.8mA
- Voltage Gain-Min :
- 2000
- Product Type :
- Circular MIL Spec Connector
- Low-Bias :
- No
- Slew Rate-Min :
- 10 V/us
- Manufacturer Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Supply Voltage Limit-Max :
- 6.3 V
- Power Supplies :
- 3/5/+-5 V
- Unity Gain BW-Nom :
- 65000 kHz
- Programmable Power :
- No
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Terminal Position :
- Dual
- Length :
- 4.9 mm
- Number of Terminals :
- 8
- Pin Count :
- 8
- Neg Supply Voltage-Nom (Vsup) :
- -5 V
- Product Status :
- Active
- Output Current per Channel :
- 50 mA
- Wideband :
- No
- Peak Reflow Temperature (Cel) :
- 260
- Slew Rate :
- 25 V/µs
- Max Dual Supply Voltage :
- 6.3 V
- Input Offset Voltage-Max :
- 4500 µV
- Product Category :
- Circular MIL Spec Connector
- Package :
- Tube
- Micropower :
- No
- Operating Supply Current :
- 1.8 mA
- Time@Peak Reflow Temperature-Max (s) :
- 30
- Number of Circuits :
- 1
- Number of Elements :
- 1
- Low-Offset :
- No
- Manufacturer :
- ITT Cannon
- Frequency Compensation :
- yes
- Bias Current-Max (IIB) @25C :
- 1.5 µA
- Voltage Gain dB :
- 39 dB
- Voltage Gain :
- 98.59 dB
- Terminal Pitch :
- 1.27 mm
- Number of Channels :
- 1
- Temperature Grade :
- Industrial
- Terminal Finish :
- Matte Tin (Sn)
- Common Mode Rejection Ratio :
- 85 dB
- Supplier Device Package :
- 8-SO
- ECCN Code :
- EAR99
- Brand Name :
- Linear Technology
- Output Type :
- Rail-to-Rail
- Input Type :
- Rail-to-Rail
- Brand :
- ITT Cannon
- Number of Functions :
- 1
- Min Operating Temperature :
- -40 °C
- Terminal Form :
- Gull wing
- Voltage - Input Offset :
- 700 µV
- Subcategory :
- Circular Connectors
- Operating Temperature :
- -40°C ~ 85°C
- Number of Pins :
- 8
- Nominal Gain Bandwidth Product :
- 80 MHz
- Amplifier Type :
- GENERAL PURPOSE
- Power :
- No
- Current - Input Bias :
- 400 nA
- Surface Mount :
- yes
- Max Operating Temperature :
- 85 °C
- Packaging :
- Tube
- Min Supply Voltage :
- 2.3 V
- Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Input Offset Voltage (Vos) :
- 350 µV
- Minimum Operating Temperature :
- - 40 C
- Mounting Style :
- SMD/SMT
- Architecture :
- VOLTAGE-FEEDBACK
- JESD-30 Code :
- R-PDSO-G8
- Package Shape :
- RECTANGULAR
- Width :
- 3.9 mm
- HTS Code :
- 8542.39.00.01
- Base Product Number :
- LT1800
- RoHS :
- N
- Supply Current-Max :
- 4 mA
- Average Bias Current-Max (IIB) :
- 2 µA
- Gain Bandwidth Product :
- 70 MHz
- Settling Time :
- 250 ns
- Lead Free :
- Lead Free
- Maximum Operating Temperature :
- + 85 C
- Datasheets
- LT1800IS8#PBF

1 Channels 50 mA per Channel 400 nA 85 dB Instrumentational OP Amps 2 µA 8 Pins 8-SOIC (0.154, 3.90mm Width)
LT1800IS8#PBF Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. A total of 8 pins are attached to buffer op amp. A type of Circular Connectors op amp ic can be identified by the fact that this is a type of Circular Connectors device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 350 µV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C ~ 85°C. A supply current of 1.8 mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 98.59 dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below -40 °C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85 °C. There are 1 elements in this buffer amplifier. For optimal performance, this electrical part should be connected to a supply with a current of 1.8mA. It is important to keep in mind that the power supply voltage of this electric component is below 12.6 V, which is suitable. Keeping the linear amplifier's supply voltage above 2.3 V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 6.3 V volts. Buffer op amp series numbers are indicated by the -. This op amp ic can conduct a minimum voltage gain of 2000. There are 8 wire terminals on this op amp ic.
LT1800IS8#PBF Features
8 Pins
98.59 dB voltage gain
Output Type: Rail-to-Rail
8Terminations
LT1800IS8#PBF Applications
There are a lot of Analog Devices
LT1800IS8#PBF Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















