LT1802CS#PBF
- Mfr.Part #
- LT1802CS#PBF
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- SOIC-14
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14SO
- Stock
- 56
- In Stock :
- 56
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Input Offset Voltage-Max :
- 4000 µV
- Shutdown :
- No Shutdown
- Min Dual Supply Voltage :
- 1.15 V
- Minimum Operating Temperature :
- - 40 C
- Settling Time :
- 0.25(us)
- Single Supply Voltage (Max) :
- 12.6(V)
- Single Supply Voltage (Min) :
- 2.3(V)
- Series :
- *
- Seated Height-Max :
- 1.752 mm
- Operating Temperature :
- 0°C ~ 70°C
- Dual Supply Voltage (Typ) :
- ±3/±5(V)
- Unity Gain Bandwidth Product :
- 80
- Surface Mount :
- yes
- Operating Temp Range :
- 0C to 70C
- Shut Down Feature :
- No
- Width :
- 3.899 mm
- Terminal Form :
- Gull wing
- Max Supply Voltage :
- 12.6 V
- Number of Channels :
- 4
- Operating Temperature Classification :
- COMMERCIAL
- Voltage Gain dB :
- -
- Max Operating Temperature :
- 70 °C
- Bandwidth :
- 80 MHz
- Base Product Number :
- LT1802
- Power Supply Requirement :
- Single/Dual
- Number of Circuits :
- 4
- Dual Supply Voltage (Max) :
- ±6.3(V)
- Slew Rate :
- 25(V/us)
- JESD-30 Code :
- R-PDSO-G14
- Input Type :
- Rail-to-Rail
- Supplier Device Package :
- 14-SO
- Reach Compliance Code :
- Compliant
- Input Offset Voltage (Vos) :
- 350 µV
- Amplifier Type :
- Low Power, High Speed Amplifier
- Average Bias Current-Max (IIB) :
- 2 µA
- RoHS :
- Compliant
- Manufacturer :
- Analog Devices Inc.
- Manufacturer Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Package :
- Retail Package
- Maximum Input Offset Current :
- 0.2@5V
- Subcategory :
- Amplifier ICs
- Neg Supply Voltage-Nom (Vsup) :
- -5 V
- Lead Free :
- Lead Free
- Package / Case :
- SOIC-14
- Supply Voltage Limit-Max :
- 6.3 V
- Technology :
- BiCOM
- Height :
- 1.75 mm
- Current - Output / Channel :
- 50 mA
- Terminal Position :
- Dual
- Max Dual Supply Voltage :
- 6.3 V
- Maximum Operating Temperature :
- + 85 C
- Current - Supply :
- 1.6mA (x4 Channels)
- Qualification Status :
- Not Qualified
- Packaging :
- Rail/Tube
- Mounting Type :
- Surface Mount
- Pin Count :
- 14
- JESD-609 Code :
- e3
- Mounting Style :
- SMD/SMT
- Product Status :
- Active
- Product Type :
- Op Amps - High Speed Operational Amplifiers
- Current - Input Bias :
- 25 nA
- Length :
- 8.649 mm
- Voltage Gain in dB :
- 98.59(dB)
- ECCN Code :
- EAR99
- Product :
- High Speed Amplifiers
- Input Offset Voltage :
- 3(mV)
- Temperature Grade :
- COMMERCIAL
- Power Supply Rejection Ratio :
- 78(dB)
- Package Type :
- SOIC N
- Number of Functions :
- 4
- Input Bias Current :
- 400 nA
- Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Power Supply Rejection Ratio (PSRR) :
- 78 dB
- Output Type :
- Rail-to-Rail
- Gain Bandwidth Product :
- 70 MHz
- Rad Hardened :
- No
- Unity Gain BW-Nom :
- 70000 kHz
- Single Supply Voltage (Typ) :
- 3/5/9/12(V)
- Terminal Pitch :
- 1.27 mm
- Brand :
- Analog Devices
- Package Shape :
- RECTANGULAR
- Peak Reflow Temperature (Cel) :
- 260
- Min Supply Voltage :
- 2.3 V
- Voltage - Input Offset :
- 700 µV
- Voltage Gain :
- 98.59 dB
- Brand Name :
- Linear Technology
- Output Current per Channel :
- 50 mA
- Terminal Finish :
- Matte Tin (Sn)
- Operating Supply Current :
- 1.8 mA
- Mounting :
- Surface Mount
- HTS Code :
- 8542.33.00.01
- Supply Current :
- 8@5V(mA)
- Dual Supply Voltage (Min) :
- ±1.15(V)
- Number of Terminals :
- 14
- Number of Elements :
- 4
- Min Operating Temperature :
- 0 °C
- Nominal Gain Bandwidth Product :
- 80 MHz
- Common Mode Rejection Ratio :
- 85(dB)
- Product Category :
- High Speed Operational Amplifiers
- Number of Pins :
- 14
- Datasheets
- LT1802CS#PBF
LT1802CS#PBF Documents

4 Channels 50 mA per Channel 25 nA 85(dB) Instrumentational OP Amps 2 µA 14 Pins SOIC-14
LT1802CS#PBF Overview
It is packaged in an SOIC-14-case that protects the operational amplifiers from damage. An op amp of this type is a Low Power, High Speed Amplifier-type. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. A total of 14 pins are attached to buffer op amp. A type of Amplifier ICs op amp ic can be identified by the fact that this is a type of Amplifier ICs device. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 350 µV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C ~ 70°C. A supply current of 1.8 mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 98.59 dB. This op amp ic has 4 circuits. There are a total of 4 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below 0 °C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70 °C. There are 4 elements in this buffer amplifier. For optimal performance, this electrical part should be connected to a supply with a current of 1.6mA (x4 Channels). It is important to keep in mind that the power supply voltage of this electric component is below 12.6 V, which is suitable. Keeping the linear amplifier's supply voltage above 2.3 V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 6.3 V volts. Buffer op amp series numbers are indicated by the *. There are 14 wire terminals on this op amp ic.
LT1802CS#PBF Features
14 Pins
98.59 dB voltage gain
Output Type: Rail-to-Rail
14Terminations
LT1802CS#PBF Applications
There are a lot of Analog Devices
LT1802CS#PBF Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















