ZL2008ALAFT1
- Mfr.Part #
- ZL2008ALAFT1
- Manufacturer
- Intersil (Renesas Electronics Corporation)
- Package / Case
- 36-VFQFN Exposed Pad
- Datasheet
- Download
- Description
- IC REG CTRLR BUCK PMBUS 36QFN
- Stock
- 26,161
- In Stock :
- 26,161
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Intersil (Renesas Electronics Corporation)
- Product Category :
- DC DC Switching Controllers
- Output Type :
- Transistor Driver
- Control Features :
- Current Limit, Enable, Power Good, Soft Start
- Max Operating Temperature :
- 85 °C
- Base Part Number :
- ZL2008
- Number of Functions :
- 1
- HTS Code :
- 8542.39.00.01
- Max Frequency :
- 1.4 MHz
- Topology :
- Buck
- Serial Interfaces :
- I²C, PMBus, SMBus
- Qualification Status :
- Not Qualified
- Height Seated (Max) :
- 0.9mm
- Pin Count :
- 36
- Peak Reflow Temperature (Cel) :
- NOT SPECIFIED
- Number of Terminals :
- 36
- Control Mode :
- VOLTAGE-MODE
- Package / Case :
- 36-VFQFN Exposed Pad
- Power Supplies :
- 12V
- Reach Compliance Code :
- Unknown
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Input Voltage-Nom :
- 12V
- JESD-30 Code :
- S-PQCC-N36
- Input Voltage (Min) :
- 3V
- Min Operating Temperature :
- -40 °C
- Temperature Grade :
- Industrial
- Operating Temperature (Max) :
- 85°C
- Width :
- 6mm
- Clock Sync :
- yes
- Frequency - Switching :
- 200kHz ~ 1.4MHz
- Duty Cycle :
- 95 %
- Switcher Configuration :
- Push-Pull
- ECCN Code :
- EAR99
- Control Technique :
- PULSE WIDTH MODULATION
- Additional Feature :
- ALSO ADJUSTABLE OUTPUT FROM 0.6 TO 5V
- Series :
- --
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Input Voltage (Max) :
- 14V
- Surface Mount :
- yes
- Terminal Form :
- NO LEAD
- RoHS Status :
- RoHS Compliant
- Duty Cycle (Max) :
- 95%
- Switching Frequency-Max :
- 1400kHz
- Packaging :
- Tape and Reel (TR)
- Number of Outputs :
- 1
- Output Configuration :
- Positive
- Length :
- 6mm
- Voltage - Supply (Vcc/Vdd) :
- 3 V ~ 5.5 V
- RoHS :
- Compliant
- Analog IC - Other Type :
- SWITCHING CONTROLLER
- Terminal Position :
- QUAD
- Terminal Pitch :
- 0.5mm
- Supply Current-Max (Isup) :
- 50mA
- Supplier Device Package :
- 36-QFN (6x6)
- Output Phases :
- 1
- Operating Temperature (Min) :
- -40°C
- Synchronous Rectifier :
- yes
- Supply Voltage :
- 12V
- Function :
- Step-Down
- Datasheets
- ZL2008ALAFT1
3 V ~ 5.5 V ZL2008 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 200kHz ~ 1.4MHz Transistor Driver
ZL2008ALAFT1 Overview
In the 36-VFQFN Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 3 V ~ 5.5 V volts and has 3 V ~ 5.5 V supply voltage. Suitable for working in an dc switcher that has a -40°C ~ 85°C (TA). It can switch at 200kHz ~ 1.4MHz. To provide efficient switching control, Current Limit, Enable, Power Good, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. QUAD are the position of the terminal of the switching converters. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. In addition to "ZL2008", there are other relevant dc to dc converter ics you can find. It is recommended that the dc dc voltage regulator's minimum input voltage be 3V. The dc to dc regulator can only accept 14V input voltage. DC regulator1.4 MHz has the maximum frequency. Hence, ALSO ADJUSTABLE OUTPUT FROM 0.6 TO 5V is used to better suit the DC to DC voltage regulator's situation. You should keep dc regulator at -40 °C degrees or higher. There should be 85 °C temperature above 85 °C degrees Celsius when dc regulator runs. The dc to dc voltage regulator is from the -- series. 1 functions (s) are included in the switch converters. Designing voltage regulators switchings with 36 pins. There would be 36-QFN (6x6) supplier dc dc controller package for this part. This voltage controller requires a supply voltage of 12V. It is important that the controller is supplied with 50mA more than 50mA volts of current. It is possible for this switching controller to switch at a frequency of 1400kHz. 85°C degrees is the highest switching controller's ambient temperature limit. dc to dc voltage regulators should have -40°C temperatures at the bottom.
ZL2008ALAFT1 Features
Transistor Driver Outputs
Switching Frequency: 200kHz ~ 1.4MHz
Current Limit, Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO ADJUSTABLE OUTPUT FROM 0.6 TO 5V
ZL2008ALAFT1 Applications
There are a lot of Intersil Corporation
ZL2008ALAFT1 DC to DC converter applications.
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















