TLV2775IDR
- Mfr.Part #
- TLV2775IDR
- Manufacturer
- Texas Instruments
- Package / Case
- 16-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC CMOS 4 CIRCUIT 16SOIC
- Stock
- 878
- In Stock :
- 878
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- ECCN Code :
- EAR99
- Programmable Power :
- No
- Packing Method :
- TR
- Number of Circuits :
- 4
- Pbfree Code :
- yes
- Packaging :
- Cut Tape (CT)
- Nominal Gain Bandwidth Product :
- 4.8MHz
- Slew Rate :
- 10.5V/μs
- Number of Functions :
- 4
- Lead Free :
- Lead Free
- Terminal Position :
- Dual
- Output Current :
- 50mA
- Operating Supply Current :
- 1mA
- Power :
- No
- Length :
- 9.9mm
- Base Part Number :
- TLV2775
- RoHS Status :
- ROHS3 Compliant
- Terminal Form :
- Gull wing
- Voltage Gain :
- 113.06dB
- Radiation Hardening :
- No
- Pin Count :
- 16
- Peak Reflow Temperature (Cel) :
- 260
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Max I/O Voltage :
- 2.7mV
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V ±1.25V~2.75V
- Width :
- 3.91mm
- Operating Temperature :
- -40°C~125°C
- Number of Pins :
- 16
- Power Supplies :
- 2.7/5V
- Frequency Compensation :
- yes
- Low-Offset :
- No
- Mounting Type :
- Surface Mount
- JESD-609 Code :
- e4
- Input Offset Voltage (Vos) :
- 700µV
- Supply Voltage Limit-Max :
- 7V
- Operating Supply Voltage :
- 3V
- Thickness :
- 1.58mm
- Bandwidth :
- 5.1MHz
- Common Mode Rejection Ratio :
- 60 dB
- Surface Mount :
- yes
- Number of Terminations :
- 16
- Terminal Pitch :
- 1.27mm
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Micropower :
- No
- Unity Gain BW-Nom :
- 5100 kHz
- Supply Voltage :
- 2.7V
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Output Type :
- Rail-to-Rail
- Amplifier Type :
- GENERAL PURPOSE
- Output Current per Channel :
- 50mA
- Nominal Supply Current :
- 8mA
- Architecture :
- VOLTAGE-FEEDBACK
- Current - Input Bias :
- 2pA
- Lifecycle Status :
- ACTIVE (Last Updated: 1 day ago)
- Package / Case :
- 16-SOIC (0.154, 3.90mm Width)
- Low-Bias :
- yes
- Height :
- 1.75mm
- Factory Lead Time :
- 6 Weeks
- Average Bias Current-Max (IIB) :
- 0.00035μA
- Datasheets
- TLV2775IDR
TLV2775IDR Documents

50mA per Channel 2pA 60 dB Instrumentational OP Amps 0.00035μA 3V 2.5V~5.5V ±1.25V~2.75V TLV2775 16 Pins 16-SOIC (0.154, 3.90mm Width)
TLV2775IDR Overview
In order to protect the op amps, a 16-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 16. It consists of a total of 16 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.7V battery. It has 16 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 700μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 1mA and 10 . Maintain 113.06dB as the voltage gain. In total, there are 4 circuits on this buffer amplifier. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 3V. As a result of this, the buffer amplifier is packed in TR.
TLV2775IDR Features
16 Pins
supply voltage of 2.7V
113.06dB voltage gain
Output Type: Rail-to-Rail
TLV2775IDR Applications
There are a lot of Texas Instruments
TLV2775IDR Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















