TLV2772AIDRG4
- Mfr.Part #
- TLV2772AIDRG4
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8SOIC
- Stock
- 24,787
- In Stock :
- 24,787
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Micropower :
- No
- Output Type :
- Rail-to-Rail
- Current - Input Bias :
- 2pA
- Lifecycle Status :
- ACTIVE (Last Updated: 4 days ago)
- Number of Pins :
- 8
- Length :
- 4.9mm
- Radiation Hardening :
- No
- Amplifier Type :
- GENERAL PURPOSE
- Operating Temperature :
- -40°C~125°C
- Frequency Compensation :
- yes
- Output Current per Channel :
- 50mA
- Height :
- 1.75mm
- Number of Terminations :
- 8
- Supply Voltage :
- 2.7V
- Input Offset Voltage (Vos) :
- 1.6mV
- Pbfree Code :
- yes
- Mounting Type :
- Surface Mount
- Terminal Form :
- Gull wing
- Max I/O Voltage :
- 1.6mV
- Thickness :
- 1.58mm
- Packaging :
- Tape and Reel (TR)
- Operating Supply Voltage :
- 3V
- Peak Reflow Temperature (Cel) :
- 260
- Output Current :
- 50mA
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Bandwidth :
- 5.1MHz
- Width :
- 3.91mm
- Terminal Position :
- Dual
- Unity Gain BW-Nom :
- 5100 kHz
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Nominal Supply Current :
- 4mA
- Programmable Power :
- No
- Number of Functions :
- 2
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Number of Elements :
- 2
- Low-Offset :
- No
- Supply Voltage Limit-Max :
- 7V
- Surface Mount :
- yes
- Common Mode Rejection Ratio :
- 60 dB
- RoHS Status :
- ROHS3 Compliant
- Voltage Gain :
- 113.06dB
- Voltage - Input Offset :
- 500μV
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V ±1.25V~2.75V
- Packing Method :
- TR
- Low-Bias :
- yes
- Factory Lead Time :
- 6 Weeks
- Base Part Number :
- TLV2772
- Operating Supply Current :
- 1mA
- JESD-609 Code :
- e4
- ECCN Code :
- EAR99
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Pin Count :
- 8
- Power Dissipation :
- 725mW
- Slew Rate :
- 10.5V/μs
- Average Bias Current-Max (IIB) :
- 0.00035μA
- Nominal Gain Bandwidth Product :
- 4.8MHz
- Architecture :
- VOLTAGE-FEEDBACK
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Lead Free :
- Lead Free
- Datasheets
- TLV2772AIDRG4

50mA per Channel 2pA 60 dB Instrumentational OP Amps 0.00035μA 3V 2.5V~5.5V ±1.25V~2.75V TLV2772 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLV2772AIDRG4 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.7V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1.6mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 1mA and 10 . Maintain 113.06dB as the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 2 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. As a result of this, the buffer amplifier is packed in TR.
TLV2772AIDRG4 Features
8 Pins
supply voltage of 2.7V
113.06dB voltage gain
Output Type: Rail-to-Rail
TLV2772AIDRG4 Applications
There are a lot of Texas Instruments
TLV2772AIDRG4 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















