TLV2770AIP
- Mfr.Part #
- TLV2770AIP
- Manufacturer
- Texas Instruments
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8DIP
- Stock
- 1
- In Stock :
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Input Offset Voltage (Vos) :
- 1.6mV
- Surface Mount :
- No
- Power Supplies :
- 2.7/5V
- Frequency Compensation :
- yes
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Length :
- 9.81mm
- RoHS Status :
- ROHS3 Compliant
- Operating Supply Voltage :
- 3V
- Micropower :
- No
- Nominal Gain Bandwidth Product :
- 5.1MHz
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- JESD-609 Code :
- e4
- Current - Input Bias :
- 2pA
- Number of Functions :
- 1
- Number of Channels :
- 1
- Unity Gain BW-Nom :
- 4800 kHz
- Width :
- 6.35mm
- Programmable Power :
- No
- Packaging :
- Tube
- Output Type :
- Rail-to-Rail
- Terminal Pitch :
- 2.54mm
- Low-Offset :
- No
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Architecture :
- VOLTAGE-FEEDBACK
- Terminal Position :
- Dual
- Number of Pins :
- 8
- Thickness :
- 3.9mm
- Radiation Hardening :
- No
- Bandwidth :
- 4.8MHz
- Operating Temperature :
- -40°C~125°C
- Number of Terminations :
- 8
- Slew Rate :
- 10.5V/μs
- Voltage Gain :
- 113.06dB
- Pin Count :
- 8
- Operating Supply Current :
- 1mA
- Low-Bias :
- yes
- Output Current per Channel :
- 50mA
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V ±1.25V~2.75V
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Factory Lead Time :
- 6 Weeks
- Mounting Type :
- Through Hole
- Nominal Supply Current :
- 2mA
- Common Mode Rejection Ratio :
- 70 dB
- REACH SVHC :
- No SVHC
- Max I/O Voltage :
- 1.6mV
- Height :
- 5.08mm
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Pbfree Code :
- yes
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Base Part Number :
- TLV2770
- ECCN Code :
- EAR99
- Average Bias Current-Max (IIB) :
- 0.00035μA
- Lead Free :
- Lead Free
- Output Current :
- 50mA
- Power Dissipation :
- 1W
- Supply Voltage Limit-Max :
- 7V
- Amplifier Type :
- GENERAL PURPOSE
- Voltage - Input Offset :
- 500μV
- Supply Voltage :
- 2.7V
- Datasheets
- TLV2770AIP

1 Channels 50mA per Channel 2pA 70 dB Instrumentational OP Amps 0.00035μA 3V 2.5V~5.5V ±1.25V~2.75V TLV2770 8 Pins 8-DIP (0.300, 7.62mm)
TLV2770AIP Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 1.6mV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 1mA , this buffer op amp will be able to operate. Keeping the voltage gain at 113.06dB is the best course of action. 1 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 3V.
TLV2770AIP Features
8 Pins
supply voltage of 2.7V
113.06dB voltage gain
Output Type: Rail-to-Rail
TLV2770AIP Applications
There are a lot of Texas Instruments
TLV2770AIP Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















