TLV274QDRG4Q1
- Mfr.Part #
- TLV274QDRG4Q1
- Manufacturer
- Texas Instruments
- Package / Case
- 14-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14SOIC
- Stock
- 20,746
- In Stock :
- 20,746
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Pin Count :
- 14
- Terminal Pitch :
- 1.27mm
- Low-Offset :
- No
- Programmable Power :
- No
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Operating Temperature :
- -40°C~125°C
- Architecture :
- VOLTAGE-FEEDBACK
- Output Current :
- 13mA
- Max I/O Voltage :
- 5mV
- Voltage - Supply, Single/Dual (±) :
- 2.7V~16V ±1.35V~8V
- Bandwidth :
- 3MHz
- Packing Method :
- TR
- Length :
- 8.65mm
- Lead Free :
- Lead Free
- RoHS Status :
- ROHS3 Compliant
- Peak Reflow Temperature (Cel) :
- 260
- Low-Bias :
- yes
- Output Current per Channel :
- 13mA
- Supply Voltage :
- 2.7V
- Height :
- 1.75mm
- Nominal Supply Current :
- 660μA
- Slew Rate :
- 2.1V/μs
- Amplifier Type :
- GENERAL PURPOSE
- Operating Supply Voltage :
- 8V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Nominal Gain Bandwidth Product :
- 3MHz
- Common Mode Rejection Ratio :
- 58 dB
- Factory Lead Time :
- 8 Weeks
- Pbfree Code :
- yes
- Radiation Hardening :
- No
- Input Offset Voltage (Vos) :
- 500μV
- Micropower :
- No
- Current - Output / Channel :
- 8mA
- Width :
- 3.91mm
- Surface Mount :
- yes
- Power :
- No
- Power Supplies :
- +-1.35/+-8/2.7/16V
- Operating Supply Current :
- 750µA
- ECCN Code :
- EAR99
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Packaging :
- Tape and Reel (TR)
- JESD-609 Code :
- e4
- Frequency Compensation :
- yes
- Number of Pins :
- 14
- Supply Voltage Limit-Max :
- 16.5V
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Mounting Type :
- Surface Mount
- Package / Case :
- 14-SOIC (0.154, 3.90mm Width)
- Lifecycle Status :
- ACTIVE (Last Updated: 1 week ago)
- Thickness :
- 1.58mm
- Number of Functions :
- 4
- Current - Input Bias :
- 1pA
- Voltage Gain :
- 110dB
- Unity Gain BW-Nom :
- 3000 kHz
- Output Type :
- Rail-to-Rail
- Number of Terminations :
- 14
- Number of Circuits :
- 4
- Base Part Number :
- TLV274
- Terminal Form :
- Gull wing
- Series :
- Automotive, AEC-Q100
- Terminal Position :
- Dual
- Datasheets
- TLV274QDRG4Q1

13mA per Channel 1pA 58 dB Instrumentational OP Amps 0.00006μA 8V 2.7V~16V ±1.35V~8V TLV274 14 Pins 14-SOIC (0.154, 3.90mm Width)
TLV274QDRG4Q1 Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 500μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 750μA, this op amp ic can operate. Keeping the voltage gain at 110dB is the best course of action. During the manufacturing process, this buffer amplifier is divided into 4 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V. For packing the buffer amplifier, the TR-axis is adopted. As the name implies, Automotive, AEC-Q100 refers to the series of the buffer op amp.
TLV274QDRG4Q1 Features
14 Pins
supply voltage of 2.7V
110dB voltage gain
Output Type: Rail-to-Rail
TLV274QDRG4Q1 Applications
There are a lot of Texas Instruments
TLV274QDRG4Q1 Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















