TLV274IPWR
- Mfr.Part #
- TLV274IPWR
- Manufacturer
- Texas Instruments
- Package / Case
- 14-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14TSSOP
- Stock
- 415
- In Stock :
- 415
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Unity Gain BW-Nom :
- 3000 kHz
- Nominal Supply Current :
- 3.2mA
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- Operating Supply Current :
- 625μA
- Pin Count :
- 14
- Output Type :
- Rail-to-Rail
- Number of Pins :
- 14
- Power Dissipation :
- 374mW
- Terminal Position :
- Dual
- Frequency Compensation :
- yes
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Supply Voltage :
- 5V
- Terminal Form :
- Gull wing
- Base Part Number :
- TLV274
- Voltage - Input Offset :
- 500μV
- Output Current per Channel :
- 13mA
- Peak Reflow Temperature (Cel) :
- 260
- Width :
- 4.4mm
- Packing Method :
- TR
- Amplifier Type :
- GENERAL PURPOSE
- Number of Functions :
- 4
- Low-Offset :
- No
- JESD-609 Code :
- e4
- Max I/O Voltage :
- 5mV
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Slew Rate :
- 2.6V/µs
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Low-Bias :
- yes
- RoHS Status :
- ROHS3 Compliant
- Current - Output / Channel :
- 8mA
- Number of Channels :
- 4
- Package / Case :
- 14-TSSOP (0.173, 4.40mm Width)
- Micropower :
- No
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Factory Lead Time :
- 6 Weeks
- Surface Mount :
- yes
- Power Supplies :
- +-1.35/+-8/2.7/16V
- Current - Input Bias :
- 1pA
- Height :
- 1.2mm
- Bandwidth :
- 3MHz
- Packaging :
- Cut Tape (CT)
- Operating Supply Voltage :
- 8V
- Lead Free :
- Lead Free
- Pbfree Code :
- yes
- Voltage - Supply, Single/Dual (±) :
- 2.7V~16V ±1.35V~8V
- Number of Terminations :
- 14
- REACH SVHC :
- No SVHC
- Thickness :
- 1mm
- Dual Supply Voltage :
- 5V
- Input Offset Voltage (Vos) :
- 5mV
- Mounting Type :
- Surface Mount
- Architecture :
- VOLTAGE-FEEDBACK
- Operating Temperature :
- -40°C~125°C
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Radiation Hardening :
- No
- Length :
- 5mm
- ECCN Code :
- EAR99
- Voltage Gain :
- 110dB
- Programmable Power :
- No
- Nominal Gain Bandwidth Product :
- 3MHz
- Output Current :
- 13mA
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Common Mode Rejection Ratio :
- 69 dB
- Datasheets
- TLV274IPWR

4 Channels 13mA per Channel 1pA 69 dB Instrumentational OP Amps 0.00006μA 8V 2.7V~16V ±1.35V~8V TLV274 14 Pins 14-TSSOP (0.173, 4.40mm Width)
TLV274IPWR Overview
It is packaged in an 14-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape (CT) case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 625μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 110dB. There are a total of 4 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V. An buffer amplifier is packed in a TR-shape according to the design.
TLV274IPWR Features
14 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
TLV274IPWR Applications
There are a lot of Texas Instruments
TLV274IPWR Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















