TLV274ID
- Mfr.Part #
- TLV274ID
- Manufacturer
- Texas Instruments
- Package / Case
- 14-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14SOIC
- Stock
- 19,730
- In Stock :
- 19,730
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Lead Free :
- Lead Free
- Package / Case :
- 14-SOIC (0.154, 3.90mm Width)
- Low-Offset :
- No
- Nominal Supply Current :
- 3.2mA
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Supply Voltage :
- 5V
- Voltage - Input Offset :
- 500μV
- Number of Pins :
- 14
- Pbfree Code :
- yes
- RoHS Status :
- ROHS3 Compliant
- Operating Supply Current :
- 625μA
- Packaging :
- Tube
- Architecture :
- VOLTAGE-FEEDBACK
- Frequency Compensation :
- yes
- Terminal Position :
- Dual
- Power Dissipation :
- 531mW
- Factory Lead Time :
- 6 Weeks
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Voltage - Supply, Single/Dual (±) :
- 2.7V~16V ±1.35V~8V
- Output Current per Channel :
- 13mA
- Programmable Power :
- No
- Nominal Gain Bandwidth Product :
- 3MHz
- Number of Terminations :
- 14
- Surface Mount :
- yes
- Base Part Number :
- TLV274
- Voltage Gain :
- 110dB
- Amplifier Type :
- GENERAL PURPOSE
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Low-Bias :
- yes
- Common Mode Rejection Ratio :
- 69 dB
- JESD-609 Code :
- e4
- Bandwidth :
- 3MHz
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Max I/O Voltage :
- 5mV
- Operating Temperature :
- -40°C~125°C
- ECCN Code :
- EAR99
- Pin Count :
- 14
- Dual Supply Voltage :
- 5V
- Mounting Type :
- Surface Mount
- Unity Gain BW-Nom :
- 3000 kHz
- Peak Reflow Temperature (Cel) :
- 260
- Number of Channels :
- 4
- Output Current :
- 13mA
- Height :
- 1.75mm
- Current - Input Bias :
- 1pA
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Output Type :
- Rail-to-Rail
- Width :
- 3.91mm
- Radiation Hardening :
- No
- Thickness :
- 1.58mm
- Length :
- 8.65mm
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Power Supplies :
- +-1.35/+-8/2.7/16V
- Number of Functions :
- 4
- Terminal Pitch :
- 1.27mm
- Input Offset Voltage (Vos) :
- 5mV
- Slew Rate :
- 2.6V/µs
- REACH SVHC :
- No SVHC
- Micropower :
- No
- Operating Supply Voltage :
- 5V
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- Terminal Form :
- Gull wing
- Current - Output / Channel :
- 8mA
- Datasheets
- TLV274ID
TLV274ID Documents

4 Channels 13mA per Channel 1pA 69 dB Instrumentational OP Amps 0.00006μA 5V 2.7V~16V ±1.35V~8V TLV274 14 Pins 14-SOIC (0.154, 3.90mm Width)
TLV274ID Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 625μA and 10 . Maintain 110dB as the voltage gain. Buffer op amp is equipped with 4 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 5V.
TLV274ID Features
14 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
TLV274ID Applications
There are a lot of Texas Instruments
TLV274ID Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















