TLV2475IPWPR
- Mfr.Part #
- TLV2475IPWPR
- Manufacturer
- Texas Instruments
- Package / Case
- 16-PowerTSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC CMOS 4 CIRCUIT 16HTSSOP
- Stock
- 2
- In Stock :
- 2
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Radiation Hardening :
- No
- Number of Elements :
- 4
- Voltage - Input Offset :
- 250μV
- Length :
- 5mm
- RoHS Status :
- ROHS3 Compliant
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V ±1.35V~3V
- Low-Bias :
- yes
- Power Dissipation :
- 4.21W
- JESD-609 Code :
- e4
- Lifecycle Status :
- ACTIVE (Last Updated: 5 days ago)
- Common Mode Rejection Ratio :
- 64 dB
- Amplifier Type :
- GENERAL PURPOSE
- Output Current :
- 35mA
- Bandwidth :
- 2.8MHz
- Terminal Form :
- Gull wing
- Number of Pins :
- 16
- Packaging :
- Cut Tape (CT)
- Width :
- 4.4mm
- Operating Supply Current :
- 600μA
- Input Offset Voltage (Vos) :
- 2.2mV
- Output Current per Channel :
- 35mA
- Average Bias Current-Max (IIB) :
- 0.0003μA
- Base Part Number :
- TLV2475
- Mounting Type :
- Surface Mount
- Surface Mount :
- yes
- Number of Functions :
- 4
- ECCN Code :
- EAR99
- Terminal Position :
- Dual
- Packing Method :
- TR
- Max I/O Voltage :
- 2.2mV
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Low-Offset :
- No
- Height :
- 1.2mm
- Slew Rate :
- 1.5V/µs
- Pbfree Code :
- yes
- Thickness :
- 1mm
- Programmable Power :
- No
- Operating Temperature :
- -40°C~125°C
- Architecture :
- VOLTAGE-FEEDBACK
- Voltage Gain :
- 120dB
- Bias Current-Max (IIB) @25C :
- 0.00005μA
- Lead Free :
- Lead Free
- Peak Reflow Temperature (Cel) :
- 260
- Number of Terminations :
- 16
- Supply Voltage :
- 3V
- Nominal Supply Current :
- 3.6mA
- Micropower :
- No
- Frequency Compensation :
- yes
- Current - Input Bias :
- 2.5pA
- Supply Voltage Limit-Max :
- 7V
- Moisture Sensitivity Level (MSL) :
- 2 (1 Year)
- Operating Supply Voltage :
- 3V
- Power Supplies :
- +-1.35/+-3/2.7/6V
- Input Offset Current-Max (IIO) :
- 0.00005μA
- Output Type :
- Rail-to-Rail
- Package / Case :
- 16-PowerTSSOP (0.173, 4.40mm Width)
- Unity Gain BW-Nom :
- 2800 kHz
- Pin Count :
- 16
- Datasheets
- TLV2475IPWPR
TLV2475IPWPR Documents

35mA per Channel 2.5pA 64 dB Instrumentational OP Amps 0.0003μA 3V 2.7V~6V ±1.35V~3V TLV2475 16 Pins 16-PowerTSSOP (0.173, 4.40mm Width)
TLV2475IPWPR Overview
Packaged in a 16-PowerTSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Cut Tape (CT) case. There is a growing number of terminations approaching the number of 16. The pins on this board total to 16 in total. I would like to remind you that this buffer op amp should be powered by an 3V battery. A total of 16 pins are present on the instrumentation amplifier. There is an input offset voltage of 2.2mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 600μA, this op amp ic can operate. 120dB should remain the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The linear amplifier consists of 4 different elements in total. The operating supply voltage of the buffer op amp is rated at 3V. For packing the buffer amplifier, the TR-axis is adopted.
TLV2475IPWPR Features
16 Pins
supply voltage of 3V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2475IPWPR Applications
There are a lot of Texas Instruments
TLV2475IPWPR Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















