TLV2475CDR
- Mfr.Part #
- TLV2475CDR
- Manufacturer
- Texas Instruments
- Package / Case
- 16-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC CMOS 4 CIRCUIT 16SOIC
- Stock
- 1
- In Stock :
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Pbfree Code :
- yes
- Architecture :
- VOLTAGE-FEEDBACK
- Current - Input Bias :
- 2.5pA
- Terminal Position :
- Dual
- Frequency Compensation :
- yes
- Packing Method :
- TR
- Common Mode Rejection Ratio :
- 64 dB
- Unity Gain BW-Nom :
- 2800 kHz
- Output Current :
- 35mA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Power Supplies :
- +-1.35/+-3/2.7/6V
- Bias Current-Max (IIB) @25C :
- 0.00005μA
- JESD-609 Code :
- e4
- Max I/O Voltage :
- 2.2mV
- Supply Voltage :
- 3V
- Width :
- 3.91mm
- Mounting Type :
- Surface Mount
- Thickness :
- 1.58mm
- Number of Functions :
- 4
- Operating Temperature :
- 0°C~70°C
- Length :
- 9.9mm
- Height :
- 1.75mm
- Package / Case :
- 16-SOIC (0.154, 3.90mm Width)
- Voltage - Input Offset :
- 250μV
- Average Bias Current-Max (IIB) :
- 0.0001μA
- Terminal Pitch :
- 1.27mm
- Bandwidth :
- 2.8MHz
- Terminal Form :
- Gull wing
- Radiation Hardening :
- No
- Slew Rate :
- 1.5V/µs
- Base Part Number :
- TLV2475
- Number of Pins :
- 16
- Operating Supply Voltage :
- 3V
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V ±1.35V~3V
- Output Type :
- Rail-to-Rail
- Surface Mount :
- yes
- Operating Supply Current :
- 600μA
- Nominal Supply Current :
- 3.6mA
- Number of Terminations :
- 16
- Power Dissipation :
- 1.09W
- Packaging :
- Cut Tape (CT)
- Programmable Power :
- No
- Supply Voltage Limit-Max :
- 7V
- Voltage Gain :
- 120dB
- Input Offset Current-Max (IIO) :
- 0.00005μA
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- Peak Reflow Temperature (Cel) :
- 260
- Pin Count :
- 16
- Low-Bias :
- yes
- Input Offset Voltage (Vos) :
- 2.2mV
- ECCN Code :
- EAR99
- Lead Free :
- Lead Free
- Micropower :
- No
- Number of Elements :
- 4
- Low-Offset :
- No
- RoHS Status :
- ROHS3 Compliant
- Amplifier Type :
- GENERAL PURPOSE
- Output Current per Channel :
- 35mA
- Factory Lead Time :
- 6 Weeks
- Datasheets
- TLV2475CDR

35mA per Channel 2.5pA 64 dB Instrumentational OP Amps 0.0001μA 3V 2.7V~6V ±1.35V~3V TLV2475 16 Pins 16-SOIC (0.154, 3.90mm Width)
TLV2475CDR Overview
In order to protect the op amps, a 16-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 16. It consists of a total of 16 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. It has 16 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 2.2mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 600μA and 10 . Maintain 120dB as the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 4 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. As a result of this, the buffer amplifier is packed in TR.
TLV2475CDR Features
16 Pins
supply voltage of 3V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2475CDR Applications
There are a lot of Texas Instruments
TLV2475CDR Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















