TLV2464AIDR
- Mfr.Part #
- TLV2464AIDR
- Manufacturer
- Texas Instruments
- Package / Case
- 14-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14SOIC
- Stock
- 8,521
- In Stock :
- 8,521
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Lead Free :
- Lead Free
- Output Type :
- Rail-to-Rail
- Packaging :
- Cut Tape (CT)
- Input Offset Current-Max (IIO) :
- 0.007μA
- Factory Lead Time :
- 6 Weeks
- Voltage - Input Offset :
- 500μV
- Operating Temperature :
- -40°C~125°C
- Amplifier Type :
- GENERAL PURPOSE
- RoHS Status :
- ROHS3 Compliant
- Pin Count :
- 14
- Current - Input Bias :
- 1.3nA
- Low-Offset :
- No
- Supply Voltage :
- 3V
- Output Current :
- 80mA
- Frequency Compensation :
- yes
- JESD-609 Code :
- e4
- Width :
- 3.91mm
- Thickness :
- 1.58mm
- Power Supplies :
- +-1.35/+-3/2.7/6V
- Nominal Supply Current :
- 2.6mA
- Number of Elements :
- 4
- Base Part Number :
- TLV2464
- Package / Case :
- 14-SOIC (0.154, 3.90mm Width)
- Terminal Pitch :
- 1.27mm
- Packing Method :
- TR
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V ±1.35V~3V
- Micropower :
- No
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- ECCN Code :
- EAR99
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Programmable Power :
- No
- Number of Terminations :
- 14
- Number of Functions :
- 4
- Peak Reflow Temperature (Cel) :
- 260
- Radiation Hardening :
- No
- Low-Bias :
- No
- Operating Supply Current :
- 550μA
- Max I/O Voltage :
- 1.5mV
- Length :
- 8.65mm
- Input Offset Voltage (Vos) :
- 1.5mV
- Voltage Gain :
- 109dB
- Unity Gain BW-Nom :
- 6400 kHz
- Operating Supply Voltage :
- 3V
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Common Mode Rejection Ratio :
- 66 dB
- Terminal Form :
- Gull wing
- Output Current per Channel :
- 80mA
- Architecture :
- VOLTAGE-FEEDBACK
- Height :
- 1.75mm
- Surface Mount :
- yes
- Terminal Position :
- Dual
- Number of Pins :
- 14
- Supply Voltage Limit-Max :
- 6V
- Mounting Type :
- Surface Mount
- Bandwidth :
- 6.4MHz
- Power Dissipation :
- 1.022W
- Slew Rate :
- 1.6V/µs
- Average Bias Current-Max (IIB) :
- 0.075μA
- Pbfree Code :
- yes
- Datasheets
- TLV2464AIDR
TLV2464AIDR Documents

80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 0.075μA 3V 2.7V~6V ±1.35V~3V TLV2464 14 Pins 14-SOIC (0.154, 3.90mm Width)
TLV2464AIDR Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 550μA and 10 . Maintain 109dB as the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 4 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. As a result of this, the buffer amplifier is packed in TR.
TLV2464AIDR Features
14 Pins
supply voltage of 3V
109dB voltage gain
Output Type: Rail-to-Rail
TLV2464AIDR Applications
There are a lot of Texas Instruments
TLV2464AIDR Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















