TLV2451CDR
- Mfr.Part #
- TLV2451CDR
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 1,124
- In Stock :
- 1,124
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Architecture :
- VOLTAGE-FEEDBACK
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Factory Lead Time :
- 6 Weeks
- Slew Rate :
- 0.11V/µs
- Thickness :
- 1.58mm
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Radiation Hardening :
- No
- Bias Current-Max (IIB) @25C :
- 0.005μA
- Output Type :
- Rail-to-Rail
- Common Mode Rejection Ratio :
- 70 dB
- Frequency Compensation :
- yes
- Supply Voltage Limit-Max :
- 7V
- Number of Terminations :
- 8
- Input Offset Voltage (Vos) :
- 1.5mV
- Operating Supply Voltage :
- 3V
- Bandwidth :
- 220 kHz
- Width :
- 3.91mm
- Number of Elements :
- 1
- Voltage Gain :
- 103dB
- Low-Offset :
- No
- Number of Functions :
- 1
- Amplifier Type :
- GENERAL PURPOSE
- Nominal Supply Current :
- 42μA
- Operating Temperature :
- 0°C~70°C
- JESD-609 Code :
- e4
- Peak Reflow Temperature (Cel) :
- 260
- Unity Gain BW-Nom :
- 220 kHz
- ECCN Code :
- EAR99
- Surface Mount :
- yes
- Input Offset Current-Max (IIO) :
- 0.00045μA
- Programmable Power :
- No
- Mounting Type :
- Surface Mount
- Supply Voltage :
- 3V
- RoHS Status :
- ROHS3 Compliant
- Average Bias Current-Max (IIB) :
- 0.007μA
- Lead Free :
- Lead Free
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Packaging :
- Cut Tape (CT)
- Pin Count :
- 8
- Output Current :
- 10mA
- Operating Supply Current :
- 23µA
- Power Dissipation :
- 710mW
- Base Part Number :
- TLV2451
- Output Current per Channel :
- 10mA
- Height :
- 1.75mm
- Number of Pins :
- 8
- Voltage - Input Offset :
- 300µV
- Packing Method :
- TR
- Length :
- 4.9mm
- Low-Bias :
- No
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V ±1.35V~3V
- Max I/O Voltage :
- 1.5mV
- Micropower :
- yes
- Current - Input Bias :
- 500pA
- Pbfree Code :
- yes
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- Terminal Position :
- Dual
- Terminal Form :
- Gull wing
- Datasheets
- TLV2451CDR

10mA per Channel 500pA 70 dB Instrumentational OP Amps 0.007μA 3V 2.7V~6V ±1.35V~3V TLV2451 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLV2451CDR Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Cut Tape (CT) case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 3V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 1.5mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . As long as the supply current of the chip does not exceed 23μA, this op amp ic can operate. 103dB should remain the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The linear amplifier consists of 1 different elements in total. The operating supply voltage of the buffer op amp is rated at 3V. For packing the buffer amplifier, the TR-axis is adopted.
TLV2451CDR Features
8 Pins
supply voltage of 3V
103dB voltage gain
Output Type: Rail-to-Rail
TLV2451CDR Applications
There are a lot of Texas Instruments
TLV2451CDR Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















