TLV2442QDGKRQ1
Or copy the link below:
- Mfr.Part #
- TLV2442QDGKRQ1
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8VSSOP
- Stock
- 25,133
- In Stock ：
- 25,133
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- RoHS Status :
- ROHS3 Compliant
- Lead Free :
- Lead Free
- Operating Temperature :
- -40°C~125°C
- Nominal Supply Current :
- 2.2mA
- Base Part Number :
- TLV2442
- Max I/O Voltage :
- 2mV
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Number of Channels :
- 2
- Input Offset Voltage (Vos) :
- 2mV
- Min Dual Supply Voltage :
- 1.35V
- Height :
- 1.07mm
- Output Current per Channel :
- 50mA
- Min Supply Voltage :
- 2.7V
- Voltage Gain :
- 119.55dB
- Current - Input Bias :
- 1pA
- Slew Rate :
- 1.4V/μs
- Max Operating Temperature :
- 125°C
- Amplifier Type :
- GENERAL PURPOSE
- Operating Supply Current :
- 750µA
- Supplier Device Package :
- 8-VSSOP
- Radiation Hardening :
- No
- Voltage - Input Offset :
- 300µV
- Operating Supply Voltage :
- 5V
- Lifecycle Status :
- ACTIVE (Last Updated: 1 week ago)
- Output Type :
- Rail-to-Rail
- Power Dissipation :
- 725mW
- Series :
- Automotive, AEC-Q100, LinCMOS™
- Thickness :
- 970μm
- Common Mode Rejection Ratio :
- 65 dB
- Current - Supply :
- 750µA
- Mounting Type :
- Surface Mount
- Current - Output / Channel :
- 50mA
- Factory Lead Time :
- 6 Weeks
- Number of Circuits :
- 2
- Packaging :
- Tape and Reel (TR)
- Output Current :
- 50mA
- Width :
- 3mm
- Max Supply Voltage :
- 10V
- Moisture Sensitivity Level (MSL) :
- 2 (1 Year)
- Number of Elements :
- 2
- Dual Supply Voltage :
- 3V
- Length :
- 3mm
- Min Operating Temperature :
- -40°C
- Voltage - Supply, Single/Dual (±) :
- 2.7V~10V ±1.35V~5V
- Number of Pins :
- 8
- Gain Bandwidth Product :
- 1.81MHz
- Max Dual Supply Voltage :
- 5V
- Datasheets
- TLV2442QDGKRQ1
2 Channels 50mA per Channel 1pA 65 dB Instrumentational OP Amps 5V 2.7V~10V ±1.35V~5V TLV2442 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
TLV2442QDGKRQ1 Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 750μA , this buffer op amp will be able to operate. 119.55dB should be the voltage gain. The buffer amp consists of 2 circuits in total. 2 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. You should not use op amp above 125°C . There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 5V. A supply of 750μA or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 10V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.7V, it is recommended to keep it higher. This electronic part should be conducted with a dual supply voltage of 5V volts for this part. The Automotive, AEC-Q100, LinCMOS™ stands for the buffer op amp's serial number.
TLV2442QDGKRQ1 Features
119.55dB voltage gain
Output Type: Rail-to-Rail
TLV2442QDGKRQ1 Applications
There are a lot of Texas Instruments
TLV2442QDGKRQ1 Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
