TLV2442AQPWR
- Mfr.Part #
- TLV2442AQPWR
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8TSSOP
- Stock
- 541
- In Stock :
- 541
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Operating Supply Current :
- 750µA
- Programmable Power :
- No
- Gain Bandwidth Product :
- 1.81MHz
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Height :
- 1.2mm
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Length :
- 3mm
- Low-Offset :
- No
- Input Offset Voltage (Vos) :
- 300µV
- Number of Pins :
- 8
- Packaging :
- Tape and Reel (TR)
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Max I/O Voltage :
- 950μV
- Thickness :
- 1mm
- Low-Bias :
- yes
- Terminal Form :
- Gull wing
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Voltage - Supply, Single/Dual (±) :
- 2.7V~10V ±1.35V~5V
- Voltage Gain :
- 119.55dB
- Number of Terminations :
- 8
- Micropower :
- No
- JESD-609 Code :
- e4
- Slew Rate :
- 1.4V/μs
- Nominal Supply Current :
- 2.2mA
- Operating Supply Voltage :
- 5V
- Frequency Compensation :
- yes
- Number of Circuits :
- 2
- Pbfree Code :
- yes
- Pin Count :
- 8
- Unity Gain BW-Nom :
- 1810 kHz
- Amplifier Type :
- GENERAL PURPOSE
- Terminal Position :
- Dual
- Current - Input Bias :
- 1pA
- Architecture :
- VOLTAGE-FEEDBACK
- Common Mode Rejection Ratio :
- 70 dB
- Series :
- LinCMOS™
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Terminal Pitch :
- 0.65mm
- Base Part Number :
- TLV2442
- Power :
- No
- Output Current :
- 50mA
- RoHS Status :
- ROHS3 Compliant
- Supply Voltage :
- 3V
- Number of Functions :
- 2
- Radiation Hardening :
- No
- Factory Lead Time :
- 6 Weeks
- Mounting Type :
- Surface Mount
- Peak Reflow Temperature (Cel) :
- 260
- Operating Temperature :
- -40°C~125°C
- Packing Method :
- TR
- Lead Free :
- Lead Free
- Package / Case :
- 8-TSSOP (0.173, 4.40mm Width)
- Output Type :
- Rail-to-Rail
- Output Current per Channel :
- 50mA
- Bandwidth :
- 1.75MHz
- Width :
- 4.4mm
- ECCN Code :
- EAR99
- Surface Mount :
- yes
- Datasheets
- TLV2442AQPWR
TLV2442AQPWR Documents

50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00006μA 5V 2.7V~10V ±1.35V~5V TLV2442 8 Pins 8-TSSOP (0.173, 4.40mm Width)
TLV2442AQPWR Overview
A 8-TSSOP (0.173, 4.40mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 3V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 300μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 750μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 2 circuits that are connected together. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 5V. The instrumentation amplifier is packed in the form of TR. The LinCMOS™ indicates the series number of the op amp.
TLV2442AQPWR Features
8 Pins
supply voltage of 3V
119.55dB voltage gain
Output Type: Rail-to-Rail
TLV2442AQPWR Applications
There are a lot of Texas Instruments
TLV2442AQPWR Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















