TLV2432ID
Or copy the link below:
- Mfr.Part #
- TLV2432ID
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8SOIC
- Stock
- 14,046
- In Stock ：
- 14,046
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Output Type :
- Rail-to-Rail
- REACH SVHC :
- No SVHC
- Output Current per Channel :
- 50mA
- Nominal Supply Current :
- 250μA
- Voltage - Supply, Single/Dual (±) :
- 2.7V~10V ±1.35V~5V
- Pbfree Code :
- yes
- Thickness :
- 1.58mm
- Max I/O Voltage :
- 2mV
- Architecture :
- VOLTAGE-FEEDBACK
- Number of Channels :
- 2
- Number of Pins :
- 8
- Terminal Form :
- Gull wing
- Voltage - Input Offset :
- 300µV
- Low-Bias :
- yes
- Lead Free :
- Lead Free
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- RoHS Status :
- ROHS3 Compliant
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Number of Functions :
- 2
- Current - Input Bias :
- 1pA
- Height :
- 1.75mm
- Radiation Hardening :
- No
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Power Dissipation :
- 725mW
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Voltage Gain :
- 119.55dB
- Base Part Number :
- TLV2432
- Frequency Compensation :
- yes
- Operating Supply Voltage :
- 5V
- Series :
- LinCMOS™
- Peak Reflow Temperature (Cel) :
- 260
- Pin Count :
- 8
- JESD-609 Code :
- e4
- Bandwidth :
- 500 kHz
- Lifecycle Status :
- ACTIVE (Last Updated: 1 day ago)
- Width :
- 3.91mm
- Number of Terminations :
- 8
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Operating Supply Current :
- 100μA
- Amplifier Type :
- GENERAL PURPOSE
- Low-Offset :
- No
- Unity Gain BW-Nom :
- 500 kHz
- ECCN Code :
- EAR99
- Supply Voltage :
- 3V
- Slew Rate :
- 0.25V/µs
- Surface Mount :
- yes
- Terminal Position :
- Dual
- Length :
- 4.9mm
- Dual Supply Voltage :
- 3V
- Mounting Type :
- Surface Mount
- Common Mode Rejection Ratio :
- 70 dB
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Input Offset Voltage (Vos) :
- 2mV
- Gain Bandwidth Product :
- 550kHz
- Factory Lead Time :
- 6 Weeks
- Packaging :
- Tube
- Micropower :
- yes
- Operating Temperature :
- -40°C~85°C
- Programmable Power :
- No
- Output Current :
- 50mA
- Datasheets
- TLV2432ID
TLV2432ID Documents
2 Channels 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00006μA 5V 2.7V~10V ±1.35V~5V TLV2432 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLV2432ID Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 3V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 2mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 100μA, this op amp ic can operate. Keeping the voltage gain at 119.55dB is the best course of action. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V. As the name implies, LinCMOS™ refers to the series of the buffer op amp.
TLV2432ID Features
8 Pins
supply voltage of 3V
119.55dB voltage gain
Output Type: Rail-to-Rail
TLV2432ID Applications
There are a lot of Texas Instruments
TLV2432ID Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
