TLV2252ID
Or copy the link below:
- Mfr.Part #
- TLV2252ID
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 67,491
- In Stock ：
- 67,491
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Power Dissipation :
- 725mW
- Supply Voltage Limit-Max :
- 16V
- Number of Functions :
- 2
- Peak Reflow Temperature (Cel) :
- 260
- Length :
- 4.9mm
- Output Current :
- 50mA
- Low-Offset :
- No
- Max I/O Voltage :
- 1.5mV
- Supply Voltage :
- 3V
- Frequency Compensation :
- yes
- Height :
- 1.75mm
- Factory Lead Time :
- 6 Weeks
- Amplifier Type :
- GENERAL PURPOSE
- RoHS Status :
- ROHS3 Compliant
- Lead Free :
- Lead Free
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Pbfree Code :
- yes
- Thickness :
- 1.58mm
- REACH SVHC :
- No SVHC
- Width :
- 3.91mm
- Slew Rate :
- 0.12V/µs
- Voltage - Input Offset :
- 200μV
- Lifecycle Status :
- ACTIVE (Last Updated: 5 days ago)
- Number of Terminations :
- 8
- Packaging :
- Tube
- Number of Pins :
- 8
- Terminal Position :
- Dual
- Dual Supply Voltage :
- 3V
- Low-Bias :
- yes
- Architecture :
- VOLTAGE-FEEDBACK
- Current - Input Bias :
- 1pA
- Voltage Gain :
- 124.61dB
- Series :
- LinCMOS™
- Voltage - Supply, Single/Dual (±) :
- 2.7V~8V
- Micropower :
- yes
- Common Mode Rejection Ratio :
- 65 dB
- Operating Supply Current :
- 70µA
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Input Offset Voltage (Vos) :
- 1.5mV
- ECCN Code :
- EAR99
- Pin Count :
- 8
- Programmable Power :
- No
- Output Type :
- Rail-to-Rail
- Gain Bandwidth Product :
- 200kHz
- Unity Gain BW-Nom :
- 200 kHz
- Number of Channels :
- 2
- Radiation Hardening :
- No
- Mounting Type :
- Surface Mount
- Output Current per Channel :
- 50mA
- Operating Supply Voltage :
- 4V
- Nominal Supply Current :
- 125μA
- Terminal Form :
- Gull wing
- Operating Temperature :
- -40°C~125°C
- Bandwidth :
- 187 kHz
- Surface Mount :
- yes
- JESD-609 Code :
- e4
- Base Part Number :
- TLV2252
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Average Bias Current-Max (IIB) :
- 0.001μA
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Datasheets
- TLV2252ID
TLV2252ID Documents
2 Channels 50mA per Channel 1pA 65 dB Instrumentational OP Amps 0.001μA 4V 2.7V~8V TLV2252 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLV2252ID Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 3V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 1.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 70μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 2 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 4V. The LinCMOS™ indicates the series number of the op amp.
TLV2252ID Features
8 Pins
supply voltage of 3V
124.61dB voltage gain
Output Type: Rail-to-Rail
TLV2252ID Applications
There are a lot of Texas Instruments
TLV2252ID Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
