TLC2274IPWR
- Mfr.Part #
- TLC2274IPWR
- Manufacturer
- Texas Instruments
- Package / Case
- 14-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14TSSOP
- Stock
- 30
- In Stock :
- 30
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Max I/O Voltage :
- 2.5mV
- Power :
- No
- Number of Terminations :
- 14
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Height :
- 1.2mm
- Number of Functions :
- 4
- Supply Voltage :
- 5V
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Base Part Number :
- TLC2274
- Supply Voltage Limit-Max :
- 8V
- Factory Lead Time :
- 6 Weeks
- Series :
- LinCMOS™
- Terminal Form :
- Gull wing
- Programmable Power :
- No
- Length :
- 5mm
- Voltage Gain :
- 104.86dB
- Frequency Compensation :
- yes
- Voltage - Input Offset :
- 300µV
- JESD-609 Code :
- e4
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Voltage - Supply, Single/Dual (±) :
- 4.4V~16V ±2.2V~8V
- Surface Mount :
- yes
- Thickness :
- 1mm
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Operating Temperature :
- -40°C~125°C
- Nominal Supply Current :
- 6mA
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Lead Free :
- Lead Free
- Width :
- 4.4mm
- Micropower :
- No
- Nominal Gain Bandwidth Product :
- 2.18MHz
- Unity Gain BW-Nom :
- 2180 kHz
- Common Mode Rejection Ratio :
- 70 dB
- REACH SVHC :
- No SVHC
- Gain Bandwidth Product :
- 2.25MHz
- Number of Channels :
- 4
- Pin Count :
- 14
- ECCN Code :
- EAR99
- Operating Supply Voltage :
- 8V
- Operating Supply Current :
- 4.8mA
- Output Type :
- Rail-to-Rail
- Bandwidth :
- 2.18MHz
- Low-Bias :
- yes
- Mounting Type :
- Surface Mount
- Architecture :
- VOLTAGE-FEEDBACK
- Amplifier Type :
- GENERAL PURPOSE
- Contact Plating :
- Gold
- Output Current :
- 50mA
- Package / Case :
- 14-TSSOP (0.173, 4.40mm Width)
- Slew Rate :
- 3.6V/μs
- Packing Method :
- TR
- Terminal Position :
- Dual
- Radiation Hardening :
- No
- Dual Supply Voltage :
- 5V
- RoHS Status :
- ROHS3 Compliant
- Lifecycle Status :
- ACTIVE (Last Updated: 4 days ago)
- Current - Input Bias :
- 1pA
- Input Offset Voltage (Vos) :
- 2.5mV
- Pbfree Code :
- yes
- Packaging :
- Cut Tape (CT)
- Output Current per Channel :
- 50mA
- Number of Pins :
- 14
- Peak Reflow Temperature (Cel) :
- 260
- Low-Offset :
- No
- Datasheets
- TLC2274IPWR

4 Channels 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00006μA 8V 4.4V~16V ±2.2V~8V TLC2274 14 Pins 14-TSSOP (0.173, 4.40mm Width)
TLC2274IPWR Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 2.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 4.8mA and 10 . 104.86dB should remain the voltage gain. Buffer op amp is equipped with 4 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 8V. As a result of this, the buffer amplifier is packed in TR. LinCMOS™ is the number that corresponds to the series of the buffer op amp.
TLC2274IPWR Features
14 Pins
supply voltage of 5V
104.86dB voltage gain
Output Type: Rail-to-Rail
TLC2274IPWR Applications
There are a lot of Texas Instruments
TLC2274IPWR Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















